WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Product Details
| Data Sheet | Download Datasheet |
|---|---|
| Usually Ships Within | 3-5 Days |
| Factory Location | Minneapolis, Minnesota |
| Material | Zinc |
| Shape | 90-Degree |
| Style | 90-Degree, Standard Pressure |
| Pressure Rating | 4500 |
| Fitting Style | Standard |
| Seal Material | Aflas (AL) |
| Series | SS90 MORB X JIC SWIVEL NUT |
| Country of Manufacture | United States |
| Height | 1.0 |
| Length | 3.075 |
| Width | 1.0 |
| Side 1 Gender | Female |
| Side 1 Size | -10 |
| Side 1 Type | JIC Swivel Nut |
| Side 2 Gender | Male |
| Side 2 Size | -10 |
| Side 2 Type | ORB |
Description
Super Swivels 90-Degree Standard Pressure Male O-Ring Boss (ORB) x Female JIC Swivel Nut hydraulic swivels provide free rotation on one axis while creating a compact right-angle change in the fluid path. The male SAE straight-thread ORB connection uses an O-ring for dependable, leak-resistant sealing, while the female JIC swivel nut seals against a compatible 37-degree male flare. The full-flow design reduces hose-line complexity and bend radius, allowing hoses and piping to move more freely while helping prevent twisting, kinking, shock damage, and premature hose failure. A heavy-duty ball-bearing race withstands side loads to minimize internal seal wear and leakage, while the ORB-to-JIC configuration connects directly to compatible hydraulic lines without additional adapters. Available in matching and reducing configurations from -4 through -24, these hydraulic swivel fittings have maximum working pressures from 3,500 to 4,500 PSI, depending on size.
Warning: Select the correct swivel size and seal material for the system fluid, temperature, operating pressure, and application. Never exceed the maximum pressure specified for the individual part number. Depressurize the hydraulic system before installation, inspection, or service; escaping fluid under pressure can penetrate the skin and cause serious injury. Do not apply pipe-thread sealant or sealing tape to either connection. Verify that the ORB O-ring and sealing surfaces are clean, undamaged, properly seated, and compatible with the hydraulic fluid. Keep the JIC flare surfaces clean and undamaged, avoid overtightening, and replace any swivel that is worn, damaged, or leaking.
- Opens in a new window.