Shop 2-Position, 3-Way, Multipurpose Direct Acting Solenoid Valves

The Norgren KIP solenoid valves are the engineer's choice for critical applications, from the complexity of medical diagnostic equipment to the harshest environmental 

conditions. In most applications, KIP controls will see millions of cycles before retrofit or replacement is required. Available in 2 and 3 way 

configurations. Different housing styles available to best fit your application. Compatible with various liquids and gases and UL recognized.


All standard Norgren KIP valves are supplied with spring compensated Fluorocarbon upper seals with Buna-N lower seals and O-Rings. 
Both upper and lower seals are also available in the following seal materials:
  • Buna N: General purpose, soft, synthetic rubber suitable for most air, non-potable water, and light oil environments with temperatures to 200F.

  • Fluorocarbon: Soft, fluorocarbon rubber used primarily with hydrocarbon liquids such as gasoline, aerospace fuels, solvents, etc. which can cause 

    swelling and distortion to Buna. Also used for oxygen service. Appropriate for higher temp ranges and more resistant to 'dry' heat.

  • Ethylene Propylene (EPR) Food Grade: Soft, synthetic rubber ideal for beverages, potable water and steam (where steam pressure is below 50psi). 

    Suitable for steam and hot water where temps are above Buna's tolerances. EPR is not appropriate for petroleum liquids or petroleum-contaminated

    air. Compatible with automotive brake fluids and phosphate ester synthetic oil. 

Shop Norgren KIP Valve Series, 2-Position 3-Way Function, Multipurpose, Brass

Model

Series

Port

Housing

Body/Seal

Function

Voltage

Cv

1/8" NPT

Grommet

Brass/Fluorocarbon

3/2, MP

12VDC

0.165

U353164-0153-24VDC

3

1/4" NPT

Yoke

Brass/Buna

3/2, MP

24VDC

0.165



Shop Norgren KIP Valve Series, 2-Position 3-Way Function, Multipurpose, Stainless

Model

Series

Port

Housing

Body/Seal

Function

Voltage

Cv

1/8" NPT

Grommet

Stainless/Polyurethane

3/2, MP

24VDC

0.05

1/8" NPT

Slotted

Stainless/Fluorocarbon

3/2, MP

12VDC, Molded with Leads

0.085

1/8" NPT

Grommet

Stainless/EPR (Food Grade)

3/2, MP

24VDC

0.165

1/8" NPT

Slotted

Stainless/Fluorocarbon

3/2, MP

24VDC, Molded with Leads

0.24