{"title":"Shop MiniBooster HC6-B Hydraulic Intensifiers with Dump Valve","description":"\u003cp class=\"PDq2pG_selectionAnchorContainer\"\u003eThe \u003cstrong\u003eminiBOOSTER HC6-B hydraulic intensifier\u003c\/strong\u003e, also called a hydraulic pressure booster, is a high-flow inline unit that converts an existing low-pressure hydraulic supply into higher outlet pressure. The HC6-B is the \u003cstrong\u003eB-model configuration with an integrated dump valve\u003c\/strong\u003e, allowing pressure on the high-pressure side to be relieved through the booster. When return port \u003cstrong\u003eR\u003c\/strong\u003e is pressurized and inlet port \u003cstrong\u003eIN\u003c\/strong\u003e is open to tank, pilot pressure opens the dump valve (\u003cstrong\u003eDV\u003c\/strong\u003e), allowing fluid from high-pressure port \u003cstrong\u003eH\u003c\/strong\u003e to return to tank. The HC6 family offers nine intensification ratios from 1.3:1 to 8.2:1, accepts inlet pressures from 20 to 207 bar (290 to 3,000 psi), and produces outlet pressures up to 800 bar (11,600 psi). Depending on the selected ratio, it can provide intensified flow up to 28.3 L\/min (7.5 GPM) with inlet flow capacity up to 80 L\/min (21.1 GPM). Applications include hydraulic presses, large cylinders, heavy-duty clamping and workholding, pressure testing, bolt tensioning, mobile machinery, construction equipment and industrial automation.\u003cspan class=\"PDq2pG_selectionAnchor\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe HC6-B combines localized high-pressure generation, substantial flow capacity and controlled depressurization in one compact unit, reducing external piping and eliminating the need for a separate high-pressure pump or external dump-valve assembly. It automatically stops intensifying when the required pressure is reached and restarts if pressure falls because of fluid consumption or leakage. \u003cstrong\u003eWarning:\u003c\/strong\u003e The dump valve operates only when the circuit applies the required pilot pressure at port R while port IN is open to tank. Incorrect plumbing, insufficient pilot pressure, excessive return backpressure or trapped fluid can prevent proper depressurization. Never assume the high-pressure side has been relieved; verify zero pressure with an appropriately rated gauge before service. Select the correct intensification ratio and ensure all hoses, fittings, valves, gauges, seals, manifolds and actuators are rated for the maximum possible outlet pressure. Installation must be performed by qualified hydraulic personnel.\u003c\/p\u003e","products":[{"product_id":"hc6-1-3-b-1-minibooster-pressure-intensifier-1-3-ratio-1-2-bspp-inlet-port-1-2-bspp-outlet-port-13-2gpm-and-3000psi-inlet-5-4gpm-and-11600psi-outlet-with-dump-valve","title":"HC6-1.3-B-1 miniBooster Pressure Intensifier, 1.3 Ratio, 1\/2\" BSPP Inlet Port, 1\/2\" BSPP Outlet Port, 13.2GPM and 3000psi Inlet, 5.4GPM and 11600psi Outlet, With Dump Valve","description":"\u003cp\u003eThe miniBOOSTER HC6 Hydraulic Intensifier is a compact, high-flow pressure booster designed for hydraulic systems that require substantial flow at elevated pressure. The inline HC6 accepts inlet pressures from 20 to 207 bar (290 to 3,000 psi) and produces outlet pressures up to 800 bar (11,600 psi). Nine available intensification ratios from 1.3:1 to 8.2:1 provide intensified outlet flows up to 28.3 L\/min (7.5 GPM), depending on the selected ratio, with inlet flow capacity up to 80 L\/min (21.1 GPM). The HC6 automatically stalls when the target pressure is reached and restarts as necessary to compensate for oil consumption or leakage. Available configurations include the HC6-A without a dump valve, HC6-B with an integrated dump valve, and HC6-G with proportional pressure control. With 1\/2-inch BSPP ports and a weight of approximately 20.9 lb (9.5 kg), the HC6 is suited for hydraulic presses, workholding and clamping systems, industrial automation, testing equipment, heavy machinery, and other high-pressure applications requiring greater flow capacity.\u003c\/p\u003e\n\n\u003cp\u003eWarning: Hydraulic intensifiers can generate extremely high and potentially dangerous pressure. Select the intensification ratio according to the maximum available inlet pressure, return-line backpressure, required outlet pressure, and flow demand. Never exceed the HC6’s 800-bar maximum outlet pressure or the working-pressure rating of any hose, fitting, valve, gauge, seal, actuator, manifold, or downstream component. Keep return pressure as low as possible because backpressure reduces effective outlet pressure. Installation and service must be performed by qualified hydraulic personnel with the system shut down, isolated, and completely depressurized. Verify hydraulic-fluid compatibility, connection type, tightening torque, model configuration, flow capacity, and G-model control requirements using the manufacturer’s documentation before ordering or operation.\u003c\/p\u003e","brand":"miniBooster","offers":[{"title":"Default Title","offer_id":53697165525285,"sku":"HC6-1.3-B-1","price":1571.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0252\/8375\/6086\/files\/HC6-1_fe277d72-5bcb-4854-a2ac-54a8cd1d9ab3.png?v=1787964655"},{"product_id":"hc6-1-5-b-1-minibooster-pressure-intensifier-1-5-ratio-1-2-bspp-inlet-port-1-2-bspp-outlet-port-21-1gpm-and-3000psi-inlet-7-5gpm-and-11600psi-outlet-with-dump-valve","title":"HC6-1.5-B-1 miniBooster Pressure Intensifier, 1.5 Ratio, 1\/2\" BSPP Inlet Port, 1\/2\" BSPP Outlet Port, 21.1GPM and 3000psi Inlet, 7.5GPM and 11600psi Outlet, With Dump Valve","description":"\u003cp\u003eThe miniBOOSTER HC6 Hydraulic Intensifier is a compact, high-flow pressure booster designed for hydraulic systems that require substantial flow at elevated pressure. The inline HC6 accepts inlet pressures from 20 to 207 bar (290 to 3,000 psi) and produces outlet pressures up to 800 bar (11,600 psi). Nine available intensification ratios from 1.3:1 to 8.2:1 provide intensified outlet flows up to 28.3 L\/min (7.5 GPM), depending on the selected ratio, with inlet flow capacity up to 80 L\/min (21.1 GPM). The HC6 automatically stalls when the target pressure is reached and restarts as necessary to compensate for oil consumption or leakage. Available configurations include the HC6-A without a dump valve, HC6-B with an integrated dump valve, and HC6-G with proportional pressure control. With 1\/2-inch BSPP ports and a weight of approximately 20.9 lb (9.5 kg), the HC6 is suited for hydraulic presses, workholding and clamping systems, industrial automation, testing equipment, heavy machinery, and other high-pressure applications requiring greater flow capacity.\u003c\/p\u003e\n\n\u003cp\u003eWarning: Hydraulic intensifiers can generate extremely high and potentially dangerous pressure. Select the intensification ratio according to the maximum available inlet pressure, return-line backpressure, required outlet pressure, and flow demand. Never exceed the HC6’s 800-bar maximum outlet pressure or the working-pressure rating of any hose, fitting, valve, gauge, seal, actuator, manifold, or downstream component. Keep return pressure as low as possible because backpressure reduces effective outlet pressure. Installation and service must be performed by qualified hydraulic personnel with the system shut down, isolated, and completely depressurized. Verify hydraulic-fluid compatibility, connection type, tightening torque, model configuration, flow capacity, and G-model control requirements using the manufacturer’s documentation before ordering or operation.\u003c\/p\u003e","brand":"miniBooster","offers":[{"title":"Default Title","offer_id":53697165656357,"sku":"HC6-1.5-B-1","price":1571.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0252\/8375\/6086\/files\/HC6-1_ae2dc1dc-a9c8-4284-b19a-ea2b2ef26e15.png?v=1787964662"},{"product_id":"hc6-1-9-b-1-minibooster-pressure-intensifier-1-9-ratio-1-2-bspp-inlet-port-1-2-bspp-outlet-port-21-1gpm-and-3000psi-inlet-5-9gpm-and-11600psi-outlet-with-dump-valve","title":"HC6-1.9-B-1 miniBooster Pressure Intensifier, 1.9 Ratio, 1\/2\" BSPP Inlet Port, 1\/2\" BSPP Outlet Port, 21.1GPM and 3000psi Inlet, 5.9GPM and 11600psi Outlet, With Dump Valve","description":"\u003cp\u003eThe miniBOOSTER HC6 Hydraulic Intensifier is a compact, high-flow pressure booster designed for hydraulic systems that require substantial flow at elevated pressure. The inline HC6 accepts inlet pressures from 20 to 207 bar (290 to 3,000 psi) and produces outlet pressures up to 800 bar (11,600 psi). Nine available intensification ratios from 1.3:1 to 8.2:1 provide intensified outlet flows up to 28.3 L\/min (7.5 GPM), depending on the selected ratio, with inlet flow capacity up to 80 L\/min (21.1 GPM). The HC6 automatically stalls when the target pressure is reached and restarts as necessary to compensate for oil consumption or leakage. Available configurations include the HC6-A without a dump valve, HC6-B with an integrated dump valve, and HC6-G with proportional pressure control. With 1\/2-inch BSPP ports and a weight of approximately 20.9 lb (9.5 kg), the HC6 is suited for hydraulic presses, workholding and clamping systems, industrial automation, testing equipment, heavy machinery, and other high-pressure applications requiring greater flow capacity.\u003c\/p\u003e\n\n\u003cp\u003eWarning: Hydraulic intensifiers can generate extremely high and potentially dangerous pressure. Select the intensification ratio according to the maximum available inlet pressure, return-line backpressure, required outlet pressure, and flow demand. Never exceed the HC6’s 800-bar maximum outlet pressure or the working-pressure rating of any hose, fitting, valve, gauge, seal, actuator, manifold, or downstream component. Keep return pressure as low as possible because backpressure reduces effective outlet pressure. Installation and service must be performed by qualified hydraulic personnel with the system shut down, isolated, and completely depressurized. Verify hydraulic-fluid compatibility, connection type, tightening torque, model configuration, flow capacity, and G-model control requirements using the manufacturer’s documentation before ordering or operation.\u003c\/p\u003e","brand":"miniBooster","offers":[{"title":"Default Title","offer_id":53697166115109,"sku":"HC6-1.9-B-1","price":1571.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0252\/8375\/6086\/files\/HC6-1_631b5ada-3815-438f-9e3b-50b5c2da197a.png?v=1787964669"},{"product_id":"hc6-2-5-b-1-minibooster-pressure-intensifier-2-5-ratio-1-2-bspp-inlet-port-1-2-bspp-outlet-port-21-1gpm-and-3000psi-inlet-4-5gpm-and-11600psi-outlet-with-dump-valve","title":"HC6-2.5-B-1 miniBooster Pressure Intensifier, 2.5 Ratio, 1\/2\" BSPP Inlet Port, 1\/2\" BSPP Outlet Port, 21.1GPM and 3000psi Inlet, 4.5GPM and 11600psi Outlet, With Dump Valve","description":"\u003cp\u003eThe miniBOOSTER HC6 Hydraulic Intensifier is a compact, high-flow pressure booster designed for hydraulic systems that require substantial flow at elevated pressure. The inline HC6 accepts inlet pressures from 20 to 207 bar (290 to 3,000 psi) and produces outlet pressures up to 800 bar (11,600 psi). Nine available intensification ratios from 1.3:1 to 8.2:1 provide intensified outlet flows up to 28.3 L\/min (7.5 GPM), depending on the selected ratio, with inlet flow capacity up to 80 L\/min (21.1 GPM). The HC6 automatically stalls when the target pressure is reached and restarts as necessary to compensate for oil consumption or leakage. Available configurations include the HC6-A without a dump valve, HC6-B with an integrated dump valve, and HC6-G with proportional pressure control. With 1\/2-inch BSPP ports and a weight of approximately 20.9 lb (9.5 kg), the HC6 is suited for hydraulic presses, workholding and clamping systems, industrial automation, testing equipment, heavy machinery, and other high-pressure applications requiring greater flow capacity.\u003c\/p\u003e\n\n\u003cp\u003eWarning: Hydraulic intensifiers can generate extremely high and potentially dangerous pressure. Select the intensification ratio according to the maximum available inlet pressure, return-line backpressure, required outlet pressure, and flow demand. Never exceed the HC6’s 800-bar maximum outlet pressure or the working-pressure rating of any hose, fitting, valve, gauge, seal, actuator, manifold, or downstream component. Keep return pressure as low as possible because backpressure reduces effective outlet pressure. Installation and service must be performed by qualified hydraulic personnel with the system shut down, isolated, and completely depressurized. Verify hydraulic-fluid compatibility, connection type, tightening torque, model configuration, flow capacity, and G-model control requirements using the manufacturer’s documentation before ordering or operation.\u003c\/p\u003e","brand":"miniBooster","offers":[{"title":"Default Title","offer_id":53697166278949,"sku":"HC6-2.5-B-1","price":1571.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0252\/8375\/6086\/files\/HC6-1_ccf56c92-2c10-415e-b69a-97814fe57eba.png?v=1787964677"},{"product_id":"hc6-3-3-b-1-minibooster-pressure-intensifier-3-3-ratio-1-2-bspp-inlet-port-1-2-bspp-outlet-port-21-1gpm-and-3000psi-inlet-3-4gpm-and-11600psi-outlet-with-dump-valve","title":"HC6-3.3-B-1 miniBooster Pressure Intensifier, 3.3 Ratio, 1\/2\" BSPP Inlet Port, 1\/2\" BSPP Outlet Port, 21.1GPM and 3000psi Inlet, 3.4GPM and 11600psi Outlet, With Dump Valve","description":"\u003cp\u003eThe miniBOOSTER HC6 Hydraulic Intensifier is a compact, high-flow pressure booster designed for hydraulic systems that require substantial flow at elevated pressure. The inline HC6 accepts inlet pressures from 20 to 207 bar (290 to 3,000 psi) and produces outlet pressures up to 800 bar (11,600 psi). Nine available intensification ratios from 1.3:1 to 8.2:1 provide intensified outlet flows up to 28.3 L\/min (7.5 GPM), depending on the selected ratio, with inlet flow capacity up to 80 L\/min (21.1 GPM). The HC6 automatically stalls when the target pressure is reached and restarts as necessary to compensate for oil consumption or leakage. Available configurations include the HC6-A without a dump valve, HC6-B with an integrated dump valve, and HC6-G with proportional pressure control. With 1\/2-inch BSPP ports and a weight of approximately 20.9 lb (9.5 kg), the HC6 is suited for hydraulic presses, workholding and clamping systems, industrial automation, testing equipment, heavy machinery, and other high-pressure applications requiring greater flow capacity.\u003c\/p\u003e\n\n\u003cp\u003eWarning: Hydraulic intensifiers can generate extremely high and potentially dangerous pressure. Select the intensification ratio according to the maximum available inlet pressure, return-line backpressure, required outlet pressure, and flow demand. Never exceed the HC6’s 800-bar maximum outlet pressure or the working-pressure rating of any hose, fitting, valve, gauge, seal, actuator, manifold, or downstream component. Keep return pressure as low as possible because backpressure reduces effective outlet pressure. Installation and service must be performed by qualified hydraulic personnel with the system shut down, isolated, and completely depressurized. Verify hydraulic-fluid compatibility, connection type, tightening torque, model configuration, flow capacity, and G-model control requirements using the manufacturer’s documentation before ordering or operation.\u003c\/p\u003e","brand":"miniBooster","offers":[{"title":"Default Title","offer_id":53697166377253,"sku":"HC6-3.3-B-1","price":1571.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0252\/8375\/6086\/files\/HC6-1_9ebfd8d9-8b73-41d0-8083-6c5e619cb115.png?v=1787964681"},{"product_id":"hc6-4-0-b-1-minibooster-pressure-intensifier-4-0-ratio-1-2-bspp-inlet-port-1-2-bspp-outlet-port-21-1gpm-and-3000psi-inlet-2-8gpm-and-11600psi-outlet-with-dump-valve","title":"HC6-4.0-B-1 miniBooster Pressure Intensifier, 4.0 Ratio, 1\/2\" BSPP Inlet Port, 1\/2\" BSPP Outlet Port, 21.1GPM and 3000psi Inlet, 2.8GPM and 11600psi Outlet, With Dump Valve","description":"\u003cp\u003eThe miniBOOSTER HC6 Hydraulic Intensifier is a compact, high-flow pressure booster designed for hydraulic systems that require substantial flow at elevated pressure. The inline HC6 accepts inlet pressures from 20 to 207 bar (290 to 3,000 psi) and produces outlet pressures up to 800 bar (11,600 psi). Nine available intensification ratios from 1.3:1 to 8.2:1 provide intensified outlet flows up to 28.3 L\/min (7.5 GPM), depending on the selected ratio, with inlet flow capacity up to 80 L\/min (21.1 GPM). The HC6 automatically stalls when the target pressure is reached and restarts as necessary to compensate for oil consumption or leakage. Available configurations include the HC6-A without a dump valve, HC6-B with an integrated dump valve, and HC6-G with proportional pressure control. With 1\/2-inch BSPP ports and a weight of approximately 20.9 lb (9.5 kg), the HC6 is suited for hydraulic presses, workholding and clamping systems, industrial automation, testing equipment, heavy machinery, and other high-pressure applications requiring greater flow capacity.\u003c\/p\u003e\n\n\u003cp\u003eWarning: Hydraulic intensifiers can generate extremely high and potentially dangerous pressure. Select the intensification ratio according to the maximum available inlet pressure, return-line backpressure, required outlet pressure, and flow demand. Never exceed the HC6’s 800-bar maximum outlet pressure or the working-pressure rating of any hose, fitting, valve, gauge, seal, actuator, manifold, or downstream component. Keep return pressure as low as possible because backpressure reduces effective outlet pressure. Installation and service must be performed by qualified hydraulic personnel with the system shut down, isolated, and completely depressurized. Verify hydraulic-fluid compatibility, connection type, tightening torque, model configuration, flow capacity, and G-model control requirements using the manufacturer’s documentation before ordering or operation.\u003c\/p\u003e","brand":"miniBooster","offers":[{"title":"Default Title","offer_id":53697166508325,"sku":"HC6-4.0-B-1","price":1571.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0252\/8375\/6086\/files\/HC6-1_d563cba3-c876-40e3-88da-3477d573dcea.png?v=1787964688"},{"product_id":"hc6-4-9-b-1-minibooster-pressure-intensifier-4-9-ratio-1-2-bspp-inlet-port-1-2-bspp-outlet-port-21-1gpm-and-3000psi-inlet-2-3gpm-and-11600psi-outlet-with-dump-valve","title":"HC6-4.9-B-1 miniBooster Pressure Intensifier, 4.9 Ratio, 1\/2\" BSPP Inlet Port, 1\/2\" BSPP Outlet Port, 21.1GPM and 3000psi Inlet, 2.3GPM and 11600psi Outlet, With Dump Valve","description":"\u003cp\u003eThe miniBOOSTER HC6 Hydraulic Intensifier is a compact, high-flow pressure booster designed for hydraulic systems that require substantial flow at elevated pressure. The inline HC6 accepts inlet pressures from 20 to 207 bar (290 to 3,000 psi) and produces outlet pressures up to 800 bar (11,600 psi). Nine available intensification ratios from 1.3:1 to 8.2:1 provide intensified outlet flows up to 28.3 L\/min (7.5 GPM), depending on the selected ratio, with inlet flow capacity up to 80 L\/min (21.1 GPM). The HC6 automatically stalls when the target pressure is reached and restarts as necessary to compensate for oil consumption or leakage. Available configurations include the HC6-A without a dump valve, HC6-B with an integrated dump valve, and HC6-G with proportional pressure control. With 1\/2-inch BSPP ports and a weight of approximately 20.9 lb (9.5 kg), the HC6 is suited for hydraulic presses, workholding and clamping systems, industrial automation, testing equipment, heavy machinery, and other high-pressure applications requiring greater flow capacity.\u003c\/p\u003e\n\n\u003cp\u003eWarning: Hydraulic intensifiers can generate extremely high and potentially dangerous pressure. Select the intensification ratio according to the maximum available inlet pressure, return-line backpressure, required outlet pressure, and flow demand. Never exceed the HC6’s 800-bar maximum outlet pressure or the working-pressure rating of any hose, fitting, valve, gauge, seal, actuator, manifold, or downstream component. Keep return pressure as low as possible because backpressure reduces effective outlet pressure. Installation and service must be performed by qualified hydraulic personnel with the system shut down, isolated, and completely depressurized. Verify hydraulic-fluid compatibility, connection type, tightening torque, model configuration, flow capacity, and G-model control requirements using the manufacturer’s documentation before ordering or operation.\u003c\/p\u003e","brand":"miniBooster","offers":[{"title":"Default Title","offer_id":53697166606629,"sku":"HC6-4.9-B-1","price":1571.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0252\/8375\/6086\/files\/HC6-1_21351cc2-4280-424e-bfa7-632dbcd379e0.png?v=1787964695"},{"product_id":"hc6-6-3-b-1-minibooster-pressure-intensifier-6-3-ratio-1-2-bspp-inlet-port-1-2-bspp-outlet-port-21-1gpm-and-3000psi-inlet-1-8gpm-and-11600psi-outlet-with-dump-valve","title":"HC6-6.3-B-1 miniBooster Pressure Intensifier, 6.3 Ratio, 1\/2\" BSPP Inlet Port, 1\/2\" BSPP Outlet Port, 21.1GPM and 3000psi Inlet, 1.8GPM and 11600psi Outlet, With Dump Valve","description":"\u003cp\u003eThe miniBOOSTER HC6 Hydraulic Intensifier is a compact, high-flow pressure booster designed for hydraulic systems that require substantial flow at elevated pressure. The inline HC6 accepts inlet pressures from 20 to 207 bar (290 to 3,000 psi) and produces outlet pressures up to 800 bar (11,600 psi). Nine available intensification ratios from 1.3:1 to 8.2:1 provide intensified outlet flows up to 28.3 L\/min (7.5 GPM), depending on the selected ratio, with inlet flow capacity up to 80 L\/min (21.1 GPM). The HC6 automatically stalls when the target pressure is reached and restarts as necessary to compensate for oil consumption or leakage. Available configurations include the HC6-A without a dump valve, HC6-B with an integrated dump valve, and HC6-G with proportional pressure control. With 1\/2-inch BSPP ports and a weight of approximately 20.9 lb (9.5 kg), the HC6 is suited for hydraulic presses, workholding and clamping systems, industrial automation, testing equipment, heavy machinery, and other high-pressure applications requiring greater flow capacity.\u003c\/p\u003e\n\n\u003cp\u003eWarning: Hydraulic intensifiers can generate extremely high and potentially dangerous pressure. Select the intensification ratio according to the maximum available inlet pressure, return-line backpressure, required outlet pressure, and flow demand. Never exceed the HC6’s 800-bar maximum outlet pressure or the working-pressure rating of any hose, fitting, valve, gauge, seal, actuator, manifold, or downstream component. Keep return pressure as low as possible because backpressure reduces effective outlet pressure. Installation and service must be performed by qualified hydraulic personnel with the system shut down, isolated, and completely depressurized. Verify hydraulic-fluid compatibility, connection type, tightening torque, model configuration, flow capacity, and G-model control requirements using the manufacturer’s documentation before ordering or operation.\u003c\/p\u003e","brand":"miniBooster","offers":[{"title":"Default Title","offer_id":53697166704933,"sku":"HC6-6.3-B-1","price":1571.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0252\/8375\/6086\/files\/HC6-1_ed195e89-6bd0-44e9-9d17-8aae22860276.png?v=1787964703"},{"product_id":"hc6-8-2-b-1-minibooster-pressure-intensifier-8-2-ratio-1-2-bspp-inlet-port-1-2-bspp-outlet-port-21-1gpm-and-3000psi-inlet-1-4gpm-and-11600psi-outlet-with-dump-valve","title":"HC6-8.2-B-1 miniBooster Pressure Intensifier, 8.2 Ratio, 1\/2\" BSPP Inlet Port, 1\/2\" BSPP Outlet Port, 21.1GPM and 3000psi Inlet, 1.4GPM and 11600psi Outlet, With Dump Valve","description":"\u003cp\u003eThe miniBOOSTER HC6 Hydraulic Intensifier is a compact, high-flow pressure booster designed for hydraulic systems that require substantial flow at elevated pressure. The inline HC6 accepts inlet pressures from 20 to 207 bar (290 to 3,000 psi) and produces outlet pressures up to 800 bar (11,600 psi). Nine available intensification ratios from 1.3:1 to 8.2:1 provide intensified outlet flows up to 28.3 L\/min (7.5 GPM), depending on the selected ratio, with inlet flow capacity up to 80 L\/min (21.1 GPM). The HC6 automatically stalls when the target pressure is reached and restarts as necessary to compensate for oil consumption or leakage. Available configurations include the HC6-A without a dump valve, HC6-B with an integrated dump valve, and HC6-G with proportional pressure control. With 1\/2-inch BSPP ports and a weight of approximately 20.9 lb (9.5 kg), the HC6 is suited for hydraulic presses, workholding and clamping systems, industrial automation, testing equipment, heavy machinery, and other high-pressure applications requiring greater flow capacity.\u003c\/p\u003e\n\n\u003cp\u003eWarning: Hydraulic intensifiers can generate extremely high and potentially dangerous pressure. Select the intensification ratio according to the maximum available inlet pressure, return-line backpressure, required outlet pressure, and flow demand. Never exceed the HC6’s 800-bar maximum outlet pressure or the working-pressure rating of any hose, fitting, valve, gauge, seal, actuator, manifold, or downstream component. Keep return pressure as low as possible because backpressure reduces effective outlet pressure. Installation and service must be performed by qualified hydraulic personnel with the system shut down, isolated, and completely depressurized. Verify hydraulic-fluid compatibility, connection type, tightening torque, model configuration, flow capacity, and G-model control requirements using the manufacturer’s documentation before ordering or operation.\u003c\/p\u003e","brand":"miniBooster","offers":[{"title":"Default Title","offer_id":53697166803237,"sku":"HC6-8.2-B-1","price":1571.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0252\/8375\/6086\/files\/HC6-1_acf63646-baa6-4cdc-bf02-8be5617cecaf.png?v=1787964706"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0252\/8375\/6086\/collections\/HC6-1_fe277d72-5bcb-4854-a2ac-54a8cd1d9ab3.png?v=1787973523","url":"https:\/\/www.onehydraulics.com\/collections\/shop-minibooster-hc6-b-hydraulic-intensifiers-with-dump-valve.oembed","provider":"OneHydraulics","version":"1.0","type":"link"}