{"title":"Shop MiniBooster HC3-G Hydraulic Intensifiers with Direct Proportional Control","description":"\u003cp class=\"gf_gs-text-heading-2\"\u003eThe miniBOOSTER HC3-G hydraulic intensifier, also called a hydraulic pressure booster, is a compact NG6 (D03) stacking-manifold unit with direct proportional RV pressure control. The RV valve allows high-pressure output at port A to be controlled proportionally from the low-pressure inlet side. HC3-G boosters are available in two variants: the standard G Dynamic model, which provides low hysteresis and fast response for applications such as hydraulic braking, and the G-__ Fail-Safe model, which uses higher hysteresis to keep high pressure stable until inlet pressure falls below approximately 50% of normal working pressure. The fail-safe version is suited to offshore safety circuits and other systems requiring controlled pressure retention and release without trapped high pressure. HC3 intensifiers offer ratios from 1.2:1 to 25:1, accept inlet pressures from 20 to 207 bar (290 to 3,000 psi), and produce outlet pressure up to 500 bar (7,250 psi), depending on the selected ratio.\u003c\/p\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003eThe HC3-G integrates proportionally controlled high-pressure generation directly into an NG6\/D03 valve stack, reducing external piping and eliminating the need for a separate high-pressure pump and control circuit. Applications include hydraulic braking, precision clamping and workholding, machine tools, testing equipment, industrial automation and offshore safety systems. Warning: The Dynamic G model requires stable inlet pressure and a supply line with a minimum inside diameter of 5 mm. Unstable inlet pressure, undersized lines, return backpressure or an incorrectly selected RV opening ratio can cause unreliable pressure control. The fail-safe G-__ variant must be selected for the specific application, with its RV opening ratio determined using qualified technical guidance. Never assume the high-pressure side has been relieved; verify zero pressure before service. All manifolds, valves, gauges, seals and actuators must be rated for the maximum possible intensified pressure.\u003c\/div\u003e","products":[{"product_id":"hc3-1-2-g-minibooster-pressure-intensifier-1-2-ratio-d03-inlet-port-d03-outlet-port-2-1gpm-and-3000psi-inlet-0-9gpm-and-7252psi-outlet-direct-proportional-controlled","title":"HC3-1.2-G miniBooster Pressure Intensifier, 1.2 Ratio, D03 Inlet Port, D03 Outlet Port, 2.1GPM and 3000psi Inlet, 0.9GPM and 7252psi Outlet, Direct Proportional Controlled","description":"\u003cp\u003eThe miniBOOSTER HC3 Hydraulic Intensifier is a compact pressure booster engineered for integration into NG6 (D03) hydraulic stacking manifold systems. Based on the HC2 design, the HC3 uses an oscillating pump to increase an existing hydraulic supply to a higher outlet pressure, automatically stalling when the target pressure is reached and restarting as needed to compensate for oil consumption or leakage. The HC3 supports inlet pressures from 20 to 207 bar (290 to 3,000 psi), offers 15 intensification ratios from 1.2:1 to 25:1, and provides maximum outlet pressure up to 500 bar (7,250 psi) in standard versions. Outlet pressure is adjusted by varying the inlet pressure. Available configurations include the HC3-A without a dump valve, HC3-B with an integrated dump valve, and HC3-G with proportional pressure control. This hydraulic pressure intensifier is ideal for workholding, clamping, machine tools, industrial automation, testing equipment, and other applications requiring localized high pressure within a compact manifold assembly.\u003c\/p\u003e\n\n\u003cp\u003eWarning: Hydraulic intensifiers can generate dangerously high pressure. The selected intensification ratio and maximum available inlet pressure must not produce an outlet pressure above the HC3’s 500-bar rating or the rating of any downstream component. Verify that all manifolds, valves, hoses, fittings, gauges, seals, and actuators are compatible with the hydraulic fluid and rated for the maximum possible system pressure. Return pressure should be kept as low as possible because backpressure reduces the effective pressure increase. Installation, adjustment, and service must be performed by qualified hydraulic personnel with the equipment shut down and completely depressurized. Consult the manufacturer’s documentation to confirm the correct ratio, flow capacity, model configuration, manifold interface, and G-model control variant before ordering or operating the unit.\u003c\/p\u003e","brand":"miniBooster","offers":[{"title":"Default Title","offer_id":53697161822501,"sku":"HC3-1.2-G","price":1143.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0252\/8375\/6086\/files\/HC3-1_c91216c6-3fb0-47bc-ac44-723900de965a.png?v=1787964525"},{"product_id":"hc3-1-5-g-minibooster-pressure-intensifier-1-5-ratio-d03-inlet-port-d03-outlet-port-3-2gpm-and-3000psi-inlet-1-1gpm-and-7252psi-outlet-direct-proportional-controlled","title":"HC3-1.5-G miniBooster Pressure Intensifier, 1.5 Ratio, D03 Inlet Port, D03 Outlet Port, 3.2GPM and 3000psi Inlet, 1.1GPM and 7252psi Outlet, Direct Proportional Controlled","description":"\u003cp\u003eThe miniBOOSTER HC3 Hydraulic Intensifier is a compact pressure booster engineered for integration into NG6 (D03) hydraulic stacking manifold systems. Based on the HC2 design, the HC3 uses an oscillating pump to increase an existing hydraulic supply to a higher outlet pressure, automatically stalling when the target pressure is reached and restarting as needed to compensate for oil consumption or leakage. The HC3 supports inlet pressures from 20 to 207 bar (290 to 3,000 psi), offers 15 intensification ratios from 1.2:1 to 25:1, and provides maximum outlet pressure up to 500 bar (7,250 psi) in standard versions. Outlet pressure is adjusted by varying the inlet pressure. Available configurations include the HC3-A without a dump valve, HC3-B with an integrated dump valve, and HC3-G with proportional pressure control. This hydraulic pressure intensifier is ideal for workholding, clamping, machine tools, industrial automation, testing equipment, and other applications requiring localized high pressure within a compact manifold assembly.\u003c\/p\u003e\n\n\u003cp\u003eWarning: Hydraulic intensifiers can generate dangerously high pressure. The selected intensification ratio and maximum available inlet pressure must not produce an outlet pressure above the HC3’s 500-bar rating or the rating of any downstream component. Verify that all manifolds, valves, hoses, fittings, gauges, seals, and actuators are compatible with the hydraulic fluid and rated for the maximum possible system pressure. Return pressure should be kept as low as possible because backpressure reduces the effective pressure increase. Installation, adjustment, and service must be performed by qualified hydraulic personnel with the equipment shut down and completely depressurized. Consult the manufacturer’s documentation to confirm the correct ratio, flow capacity, model configuration, manifold interface, and G-model control variant before ordering or operating the unit.\u003c\/p\u003e","brand":"miniBooster","offers":[{"title":"Default Title","offer_id":53697161920805,"sku":"HC3-1.5-G","price":1143.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0252\/8375\/6086\/files\/HC3-1_9a8bf83f-ee8d-4d3a-9be9-c612cf4ae3bf.png?v=1787964532"},{"product_id":"hc3-2-0-g-minibooster-pressure-intensifier-2-0-ratio-d03-inlet-port-d03-outlet-port-3-2gpm-and-3000psi-inlet-0-8gpm-and-7252psi-outlet-direct-proportional-controlled","title":"HC3-2.0-G miniBooster Pressure Intensifier, 2.0 Ratio, D03 Inlet Port, D03 Outlet Port, 3.2GPM and 3000psi Inlet, 0.8GPM and 7252psi Outlet, Direct Proportional Controlled","description":"\u003cp\u003eThe miniBOOSTER HC3 Hydraulic Intensifier is a compact pressure booster engineered for integration into NG6 (D03) hydraulic stacking manifold systems. Based on the HC2 design, the HC3 uses an oscillating pump to increase an existing hydraulic supply to a higher outlet pressure, automatically stalling when the target pressure is reached and restarting as needed to compensate for oil consumption or leakage. The HC3 supports inlet pressures from 20 to 207 bar (290 to 3,000 psi), offers 15 intensification ratios from 1.2:1 to 25:1, and provides maximum outlet pressure up to 500 bar (7,250 psi) in standard versions. Outlet pressure is adjusted by varying the inlet pressure. Available configurations include the HC3-A without a dump valve, HC3-B with an integrated dump valve, and HC3-G with proportional pressure control. This hydraulic pressure intensifier is ideal for workholding, clamping, machine tools, industrial automation, testing equipment, and other applications requiring localized high pressure within a compact manifold assembly.\u003c\/p\u003e\n\n\u003cp\u003eWarning: Hydraulic intensifiers can generate dangerously high pressure. The selected intensification ratio and maximum available inlet pressure must not produce an outlet pressure above the HC3’s 500-bar rating or the rating of any downstream component. Verify that all manifolds, valves, hoses, fittings, gauges, seals, and actuators are compatible with the hydraulic fluid and rated for the maximum possible system pressure. Return pressure should be kept as low as possible because backpressure reduces the effective pressure increase. Installation, adjustment, and service must be performed by qualified hydraulic personnel with the equipment shut down and completely depressurized. Consult the manufacturer’s documentation to confirm the correct ratio, flow capacity, model configuration, manifold interface, and G-model control variant before ordering or operating the unit.\u003c\/p\u003e","brand":"miniBooster","offers":[{"title":"Default Title","offer_id":53697162019109,"sku":"HC3-2.0-G","price":1143.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0252\/8375\/6086\/files\/HC3-1_60196d0a-4d9a-4659-ba96-544abaaee831.png?v=1787964538"},{"product_id":"hc3-2-8-g-minibooster-pressure-intensifier-2-8-ratio-d03-inlet-port-d03-outlet-port-3-4gpm-and-3000psi-inlet-0-7gpm-and-7252psi-outlet-direct-proportional-controlled","title":"HC3-2.8-G miniBooster Pressure Intensifier, 2.8 Ratio, D03 Inlet Port, D03 Outlet Port, 3.4GPM and 3000psi Inlet, 0.7GPM and 7252psi Outlet, Direct Proportional Controlled","description":"\u003cp\u003eThe miniBOOSTER HC3 Hydraulic Intensifier is a compact pressure booster engineered for integration into NG6 (D03) hydraulic stacking manifold systems. Based on the HC2 design, the HC3 uses an oscillating pump to increase an existing hydraulic supply to a higher outlet pressure, automatically stalling when the target pressure is reached and restarting as needed to compensate for oil consumption or leakage. The HC3 supports inlet pressures from 20 to 207 bar (290 to 3,000 psi), offers 15 intensification ratios from 1.2:1 to 25:1, and provides maximum outlet pressure up to 500 bar (7,250 psi) in standard versions. Outlet pressure is adjusted by varying the inlet pressure. Available configurations include the HC3-A without a dump valve, HC3-B with an integrated dump valve, and HC3-G with proportional pressure control. This hydraulic pressure intensifier is ideal for workholding, clamping, machine tools, industrial automation, testing equipment, and other applications requiring localized high pressure within a compact manifold assembly.\u003c\/p\u003e\n\n\u003cp\u003eWarning: Hydraulic intensifiers can generate dangerously high pressure. The selected intensification ratio and maximum available inlet pressure must not produce an outlet pressure above the HC3’s 500-bar rating or the rating of any downstream component. Verify that all manifolds, valves, hoses, fittings, gauges, seals, and actuators are compatible with the hydraulic fluid and rated for the maximum possible system pressure. Return pressure should be kept as low as possible because backpressure reduces the effective pressure increase. Installation, adjustment, and service must be performed by qualified hydraulic personnel with the equipment shut down and completely depressurized. Consult the manufacturer’s documentation to confirm the correct ratio, flow capacity, model configuration, manifold interface, and G-model control variant before ordering or operating the unit.\u003c\/p\u003e","brand":"miniBooster","offers":[{"title":"Default Title","offer_id":53697162281253,"sku":"HC3-2.8-G","price":1143.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0252\/8375\/6086\/files\/HC3-1_080ba116-c06a-4bbc-a988-85d4d5c101e9.png?v=1787964554"},{"product_id":"hc3-3-2-g-minibooster-pressure-intensifier-3-2-ratio-d03-inlet-port-d03-outlet-port-4gpm-and-3000psi-inlet-0-7gpm-and-7252psi-outlet-direct-proportional-controlled","title":"HC3-3.2-G miniBooster Pressure Intensifier, 3.2 Ratio, D03 Inlet Port, D03 Outlet Port, 4GPM and 3000psi Inlet, 0.7GPM and 7252psi Outlet, Direct Proportional Controlled","description":"\u003cp\u003eThe miniBOOSTER HC3 Hydraulic Intensifier is a compact pressure booster engineered for integration into NG6 (D03) hydraulic stacking manifold systems. Based on the HC2 design, the HC3 uses an oscillating pump to increase an existing hydraulic supply to a higher outlet pressure, automatically stalling when the target pressure is reached and restarting as needed to compensate for oil consumption or leakage. The HC3 supports inlet pressures from 20 to 207 bar (290 to 3,000 psi), offers 15 intensification ratios from 1.2:1 to 25:1, and provides maximum outlet pressure up to 500 bar (7,250 psi) in standard versions. Outlet pressure is adjusted by varying the inlet pressure. Available configurations include the HC3-A without a dump valve, HC3-B with an integrated dump valve, and HC3-G with proportional pressure control. This hydraulic pressure intensifier is ideal for workholding, clamping, machine tools, industrial automation, testing equipment, and other applications requiring localized high pressure within a compact manifold assembly.\u003c\/p\u003e\n\n\u003cp\u003eWarning: Hydraulic intensifiers can generate dangerously high pressure. The selected intensification ratio and maximum available inlet pressure must not produce an outlet pressure above the HC3’s 500-bar rating or the rating of any downstream component. Verify that all manifolds, valves, hoses, fittings, gauges, seals, and actuators are compatible with the hydraulic fluid and rated for the maximum possible system pressure. Return pressure should be kept as low as possible because backpressure reduces the effective pressure increase. Installation, adjustment, and service must be performed by qualified hydraulic personnel with the equipment shut down and completely depressurized. Consult the manufacturer’s documentation to confirm the correct ratio, flow capacity, model configuration, manifold interface, and G-model control variant before ordering or operating the unit.\u003c\/p\u003e","brand":"miniBooster","offers":[{"title":"Default Title","offer_id":53697162445093,"sku":"HC3-3.2-G","price":1143.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0252\/8375\/6086\/files\/HC3-1_83298bde-06b6-4653-a9a0-802756960451.png?v=1787964557"},{"product_id":"hc3-4-0-g-minibooster-pressure-intensifier-4-0-ratio-d03-inlet-port-d03-outlet-port-3-7gpm-and-3000psi-inlet-0-5gpm-and-7252psi-outlet-direct-proportional-controlled","title":"HC3-4.0-G miniBooster Pressure Intensifier, 4.0 Ratio, D03 Inlet Port, D03 Outlet Port, 3.7GPM and 3000psi Inlet, 0.5GPM and 7252psi Outlet, Direct Proportional Controlled","description":"\u003cp\u003eThe miniBOOSTER HC3 Hydraulic Intensifier is a compact pressure booster engineered for integration into NG6 (D03) hydraulic stacking manifold systems. Based on the HC2 design, the HC3 uses an oscillating pump to increase an existing hydraulic supply to a higher outlet pressure, automatically stalling when the target pressure is reached and restarting as needed to compensate for oil consumption or leakage. The HC3 supports inlet pressures from 20 to 207 bar (290 to 3,000 psi), offers 15 intensification ratios from 1.2:1 to 25:1, and provides maximum outlet pressure up to 500 bar (7,250 psi) in standard versions. Outlet pressure is adjusted by varying the inlet pressure. Available configurations include the HC3-A without a dump valve, HC3-B with an integrated dump valve, and HC3-G with proportional pressure control. This hydraulic pressure intensifier is ideal for workholding, clamping, machine tools, industrial automation, testing equipment, and other applications requiring localized high pressure within a compact manifold assembly.\u003c\/p\u003e\n\n\u003cp\u003eWarning: Hydraulic intensifiers can generate dangerously high pressure. The selected intensification ratio and maximum available inlet pressure must not produce an outlet pressure above the HC3’s 500-bar rating or the rating of any downstream component. Verify that all manifolds, valves, hoses, fittings, gauges, seals, and actuators are compatible with the hydraulic fluid and rated for the maximum possible system pressure. Return pressure should be kept as low as possible because backpressure reduces the effective pressure increase. Installation, adjustment, and service must be performed by qualified hydraulic personnel with the equipment shut down and completely depressurized. Consult the manufacturer’s documentation to confirm the correct ratio, flow capacity, model configuration, manifold interface, and G-model control variant before ordering or operating the unit.\u003c\/p\u003e","brand":"miniBooster","offers":[{"title":"Default Title","offer_id":53697162641701,"sku":"HC3-4.0-G","price":1143.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0252\/8375\/6086\/files\/HC3-1_822e39c7-26cb-4e10-8a86-53f87fd2f595.png?v=1787964564"},{"product_id":"hc3-5-0-g-minibooster-pressure-intensifier-5-0-ratio-d03-inlet-port-d03-outlet-port-3-7gpm-and-3000psi-inlet-0-4gpm-and-7252psi-outlet-direct-proportional-controlled","title":"HC3-5.0-G miniBooster Pressure Intensifier, 5.0 Ratio, D03 Inlet Port, D03 Outlet Port, 3.7GPM and 3000psi Inlet, 0.4GPM and 7252psi Outlet, Direct Proportional Controlled","description":"\u003cp\u003eThe miniBOOSTER HC3 Hydraulic Intensifier is a compact pressure booster engineered for integration into NG6 (D03) hydraulic stacking manifold systems. Based on the HC2 design, the HC3 uses an oscillating pump to increase an existing hydraulic supply to a higher outlet pressure, automatically stalling when the target pressure is reached and restarting as needed to compensate for oil consumption or leakage. The HC3 supports inlet pressures from 20 to 207 bar (290 to 3,000 psi), offers 15 intensification ratios from 1.2:1 to 25:1, and provides maximum outlet pressure up to 500 bar (7,250 psi) in standard versions. Outlet pressure is adjusted by varying the inlet pressure. Available configurations include the HC3-A without a dump valve, HC3-B with an integrated dump valve, and HC3-G with proportional pressure control. This hydraulic pressure intensifier is ideal for workholding, clamping, machine tools, industrial automation, testing equipment, and other applications requiring localized high pressure within a compact manifold assembly.\u003c\/p\u003e\n\n\u003cp\u003eWarning: Hydraulic intensifiers can generate dangerously high pressure. The selected intensification ratio and maximum available inlet pressure must not produce an outlet pressure above the HC3’s 500-bar rating or the rating of any downstream component. Verify that all manifolds, valves, hoses, fittings, gauges, seals, and actuators are compatible with the hydraulic fluid and rated for the maximum possible system pressure. Return pressure should be kept as low as possible because backpressure reduces the effective pressure increase. Installation, adjustment, and service must be performed by qualified hydraulic personnel with the equipment shut down and completely depressurized. Consult the manufacturer’s documentation to confirm the correct ratio, flow capacity, model configuration, manifold interface, and G-model control variant before ordering or operating the unit.\u003c\/p\u003e","brand":"miniBooster","offers":[{"title":"Default Title","offer_id":53697162740005,"sku":"HC3-5.0-G","price":1143.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0252\/8375\/6086\/files\/HC3-1_0614a4ae-7cc8-476a-a70b-6e6c7dbdd8be.png?v=1787964572"},{"product_id":"hc3-6-6-g-minibooster-pressure-intensifier-6-6-ratio-d03-inlet-port-d03-outlet-port-3-4gpm-and-3000psi-inlet-0-3gpm-and-7252psi-outlet-direct-proportional-controlled","title":"HC3-6.6-G miniBooster Pressure Intensifier, 6.6 Ratio, D03 Inlet Port, D03 Outlet Port, 3.4GPM and 3000psi Inlet, 0.3GPM and 7252psi Outlet, Direct Proportional Controlled","description":"\u003cp\u003eThe miniBOOSTER HC3 Hydraulic Intensifier is a compact pressure booster engineered for integration into NG6 (D03) hydraulic stacking manifold systems. Based on the HC2 design, the HC3 uses an oscillating pump to increase an existing hydraulic supply to a higher outlet pressure, automatically stalling when the target pressure is reached and restarting as needed to compensate for oil consumption or leakage. The HC3 supports inlet pressures from 20 to 207 bar (290 to 3,000 psi), offers 15 intensification ratios from 1.2:1 to 25:1, and provides maximum outlet pressure up to 500 bar (7,250 psi) in standard versions. Outlet pressure is adjusted by varying the inlet pressure. Available configurations include the HC3-A without a dump valve, HC3-B with an integrated dump valve, and HC3-G with proportional pressure control. This hydraulic pressure intensifier is ideal for workholding, clamping, machine tools, industrial automation, testing equipment, and other applications requiring localized high pressure within a compact manifold assembly.\u003c\/p\u003e\n\n\u003cp\u003eWarning: Hydraulic intensifiers can generate dangerously high pressure. The selected intensification ratio and maximum available inlet pressure must not produce an outlet pressure above the HC3’s 500-bar rating or the rating of any downstream component. Verify that all manifolds, valves, hoses, fittings, gauges, seals, and actuators are compatible with the hydraulic fluid and rated for the maximum possible system pressure. Return pressure should be kept as low as possible because backpressure reduces the effective pressure increase. Installation, adjustment, and service must be performed by qualified hydraulic personnel with the equipment shut down and completely depressurized. Consult the manufacturer’s documentation to confirm the correct ratio, flow capacity, model configuration, manifold interface, and G-model control variant before ordering or operating the unit.\u003c\/p\u003e","brand":"miniBooster","offers":[{"title":"Default Title","offer_id":53697162838309,"sku":"HC3-6.6-G","price":1143.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0252\/8375\/6086\/files\/HC3-1_fbab31cf-11f8-4f64-9a96-977ddd67e8d8.png?v=1787964578"},{"product_id":"hc3-9-0-g-minibooster-pressure-intensifier-9-0-ratio-d03-inlet-port-d03-outlet-port-3-4gpm-and-3000psi-inlet-0-2gpm-and-7252psi-outlet-direct-proportional-controlled","title":"HC3-9.0-G miniBooster Pressure Intensifier, 9.0 Ratio, D03 Inlet Port, D03 Outlet Port, 3.4GPM and 3000psi Inlet, 0.2GPM and 7252psi Outlet, Direct Proportional Controlled","description":"\u003cp\u003eThe miniBOOSTER HC3 Hydraulic Intensifier is a compact pressure booster engineered for integration into NG6 (D03) hydraulic stacking manifold systems. Based on the HC2 design, the HC3 uses an oscillating pump to increase an existing hydraulic supply to a higher outlet pressure, automatically stalling when the target pressure is reached and restarting as needed to compensate for oil consumption or leakage. The HC3 supports inlet pressures from 20 to 207 bar (290 to 3,000 psi), offers 15 intensification ratios from 1.2:1 to 25:1, and provides maximum outlet pressure up to 500 bar (7,250 psi) in standard versions. Outlet pressure is adjusted by varying the inlet pressure. Available configurations include the HC3-A without a dump valve, HC3-B with an integrated dump valve, and HC3-G with proportional pressure control. This hydraulic pressure intensifier is ideal for workholding, clamping, machine tools, industrial automation, testing equipment, and other applications requiring localized high pressure within a compact manifold assembly.\u003c\/p\u003e\n\n\u003cp\u003eWarning: Hydraulic intensifiers can generate dangerously high pressure. The selected intensification ratio and maximum available inlet pressure must not produce an outlet pressure above the HC3’s 500-bar rating or the rating of any downstream component. Verify that all manifolds, valves, hoses, fittings, gauges, seals, and actuators are compatible with the hydraulic fluid and rated for the maximum possible system pressure. Return pressure should be kept as low as possible because backpressure reduces the effective pressure increase. Installation, adjustment, and service must be performed by qualified hydraulic personnel with the equipment shut down and completely depressurized. Consult the manufacturer’s documentation to confirm the correct ratio, flow capacity, model configuration, manifold interface, and G-model control variant before ordering or operating the unit.\u003c\/p\u003e","brand":"miniBooster","offers":[{"title":"Default Title","offer_id":53697162936613,"sku":"HC3-9.0-G","price":1143.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0252\/8375\/6086\/files\/HC3-1_bfd62f34-72a0-4444-b4fb-7bd6f67e13c7.png?v=1787964582"},{"product_id":"hc3-13-0-g-minibooster-pressure-intensifier-13-0-ratio-d03-inlet-port-d03-outlet-port-3-2gpm-and-3000psi-inlet-0-2gpm-and-7252psi-outlet-direct-proportional-controlled","title":"HC3-13.0-G miniBooster Pressure Intensifier, 13.0 Ratio, D03 Inlet Port, D03 Outlet Port, 3.2GPM and 3000psi Inlet, 0.2GPM and 7252psi Outlet, Direct Proportional Controlled","description":"\u003cp\u003eThe miniBOOSTER HC3 Hydraulic Intensifier is a compact pressure booster engineered for integration into NG6 (D03) hydraulic stacking manifold systems. Based on the HC2 design, the HC3 uses an oscillating pump to increase an existing hydraulic supply to a higher outlet pressure, automatically stalling when the target pressure is reached and restarting as needed to compensate for oil consumption or leakage. The HC3 supports inlet pressures from 20 to 207 bar (290 to 3,000 psi), offers 15 intensification ratios from 1.2:1 to 25:1, and provides maximum outlet pressure up to 500 bar (7,250 psi) in standard versions. Outlet pressure is adjusted by varying the inlet pressure. Available configurations include the HC3-A without a dump valve, HC3-B with an integrated dump valve, and HC3-G with proportional pressure control. This hydraulic pressure intensifier is ideal for workholding, clamping, machine tools, industrial automation, testing equipment, and other applications requiring localized high pressure within a compact manifold assembly.\u003c\/p\u003e\n\n\u003cp\u003eWarning: Hydraulic intensifiers can generate dangerously high pressure. The selected intensification ratio and maximum available inlet pressure must not produce an outlet pressure above the HC3’s 500-bar rating or the rating of any downstream component. Verify that all manifolds, valves, hoses, fittings, gauges, seals, and actuators are compatible with the hydraulic fluid and rated for the maximum possible system pressure. Return pressure should be kept as low as possible because backpressure reduces the effective pressure increase. Installation, adjustment, and service must be performed by qualified hydraulic personnel with the equipment shut down and completely depressurized. Consult the manufacturer’s documentation to confirm the correct ratio, flow capacity, model configuration, manifold interface, and G-model control variant before ordering or operating the unit.\u003c\/p\u003e","brand":"miniBooster","offers":[{"title":"Default Title","offer_id":53697163002149,"sku":"HC3-13.0-G","price":1143.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0252\/8375\/6086\/files\/HC3-1_ef804ac5-c35e-4c61-ad8f-f7ee8c3ce42c.png?v=1787964588"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0252\/8375\/6086\/collections\/HC3-1_9a8bf83f-ee8d-4d3a-9be9-c612cf4ae3bf.png?v=1787970733","url":"https:\/\/www.onehydraulics.com\/collections\/shop-minibooster-hc3-g-hydraulic-intensifiers-with-direct-proportional-control.oembed","provider":"OneHydraulics","version":"1.0","type":"link"}