{"title":"Shop MiniBooster HC2-B Hydraulic Intensifiers with Dump Valve","description":"\u003cp class=\"gf_gs-text-heading-2\"\u003eThe miniBOOSTER HC2-B hydraulic intensifier, also called a hydraulic pressure booster, is a compact inline unit that uses an existing low-pressure hydraulic supply to generate and maintain higher outlet pressure. The HC2-B is the B-model configuration with an integrated dump valve, allowing pressure on the high-pressure side to be released through the booster. When return port R is pressurized and inlet port IN is open to tank, pilot pressure opens the dump valve (DV) so fluid from high-pressure port H can return to tank. Available HC2 intensification ratios range from 1.2:1 to 25:1, with inlet pressures from 20 to 207 bar (290 to 3,000 psi) and maximum outlet pressure up to 800 bar (11,600 psi), depending on the selected ratio. Common applications include hydraulic workholding and clamping, machine tools, presses, pressure-testing equipment, bolt tensioning, torque tools and industrial automation requiring controlled pressure buildup and release.\u003c\/p\u003e\n\u003cdiv\u003eThe HC2-B provides localized high pressure without a separate high-pressure pump or power unit, while its integrated dump valve simplifies circuit design and controlled depressurization. The booster automatically stops when the required pressure is reached and restarts if pressure drops because of fluid consumption or leakage.\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eWarning: The dump valve operates only when the hydraulic circuit supplies the required pilot pressure at port R while port IN is open to tank; incorrect plumbing or trapped pressure can prevent safe depressurization.\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eNever assume the high-pressure side has been relieved. Confirm zero pressure with an appropriately rated gauge before disconnecting or servicing any component. Select the correct intensification ratio, keep return backpressure as low as possible and ensure all hoses, fittings, valves, gauges, seals, manifolds and actuators are rated for the maximum possible outlet pressure. Installation and service must be performed by qualified hydraulic personnel with the system isolated and completely depressurized.\u003c\/div\u003e","products":[{"product_id":"hc2-1-2-b-2-minibooster-pressure-intensifier-1-2-ratio-7-16-20-unf-inlet-port-9-16-18-unf-outlet-port-2-1gpm-and-3000psi-inlet-0-9gpm-and-11600psi-outlet-with-dump-valve","title":"HC2-1.2-B-2 miniBooster Pressure Intensifier, 1.2 Ratio, 7\/16-20 UNF Inlet Port, 9\/16-18 UNF Outlet Port, 2.1GPM and 3000psi Inlet, 0.9GPM and 11600psi Outlet, With Dump Valve","description":"\u003cp\u003eThe miniBOOSTER HC2 Hydraulic Intensifier is a compact, inline pressure booster designed to generate and maintain high hydraulic pressure using an existing low-pressure supply. Weighing only 2.2 lb (1.0 kg), the HC2 automatically increases outlet pressure and compensates for minor oil consumption or leakage to maintain the required pressure. It is available with 15 intensification ratios from 1.2:1 to 25:1, inlet pressures from 20 to 207 bar (290 to 3,000 psi), and maximum outlet pressure up to 800 bar (11,600 psi). Outlet pressure is controlled by varying the supplied inlet pressure. Available configurations include the HC2-A without a dump valve, HC2-B with an integrated dump valve, and HC2-G with proportional pressure control, with BSPP or UNF port options. Typical applications include hydraulic workholding, clamping systems, machine tools, industrial automation, testing equipment, and compact machinery requiring high pressure from a conventional hydraulic power source.\u003c\/p\u003e\n\n\u003cp\u003eWarning: Hydraulic intensifiers can generate extremely high pressure. Select the correct intensification ratio and verify that all hoses, fittings, valves, gauges, actuators, and other downstream components are rated for the maximum possible outlet pressure. Never exceed the HC2’s specified inlet pressure, outlet pressure, or flow limits, and keep return-line pressure as low as possible because backpressure affects available outlet pressure. Installation, adjustment, and service should be performed only by qualified hydraulic personnel with the system completely depressurized. Confirm fluid compatibility, port configuration, tightening torque, circuit design, and model-specific requirements using the manufacturer’s documentation before operation. Specifications and available configurations vary by model.\u003c\/p\u003e","brand":"miniBooster","offers":[{"title":"Default Title","offer_id":53697156874533,"sku":"HC2-1.2-B-2","price":1320.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0252\/8375\/6086\/files\/HC2-1_6946bb66-19ec-4dee-ab65-3469297f7b41.png?v=1787964374"},{"product_id":"hc2-1-2-b-1-minibooster-pressure-intensifier-1-2-ratio-1-4-bspp-inlet-port-1-4-bspp-outlet-port-2-1gpm-and-3000psi-inlet-0-9gpm-and-11600psi-outlet-with-dump-valve","title":"HC2-1.2-B-1 miniBooster Pressure Intensifier, 1.2 Ratio, 1\/4\" BSPP Inlet Port, 1\/4\" BSPP Outlet Port, 2.1GPM and 3000psi Inlet, 0.9GPM and 11600psi Outlet, With Dump Valve","description":"\u003cp\u003eThe miniBOOSTER HC2 Hydraulic Intensifier is a compact, inline pressure booster designed to generate and maintain high hydraulic pressure using an existing low-pressure supply. Weighing only 2.2 lb (1.0 kg), the HC2 automatically increases outlet pressure and compensates for minor oil consumption or leakage to maintain the required pressure. It is available with 15 intensification ratios from 1.2:1 to 25:1, inlet pressures from 20 to 207 bar (290 to 3,000 psi), and maximum outlet pressure up to 800 bar (11,600 psi). Outlet pressure is controlled by varying the supplied inlet pressure. Available configurations include the HC2-A without a dump valve, HC2-B with an integrated dump valve, and HC2-G with proportional pressure control, with BSPP or UNF port options. Typical applications include hydraulic workholding, clamping systems, machine tools, industrial automation, testing equipment, and compact machinery requiring high pressure from a conventional hydraulic power source.\u003c\/p\u003e\n\n\u003cp\u003eWarning: Hydraulic intensifiers can generate extremely high pressure. Select the correct intensification ratio and verify that all hoses, fittings, valves, gauges, actuators, and other downstream components are rated for the maximum possible outlet pressure. Never exceed the HC2’s specified inlet pressure, outlet pressure, or flow limits, and keep return-line pressure as low as possible because backpressure affects available outlet pressure. Installation, adjustment, and service should be performed only by qualified hydraulic personnel with the system completely depressurized. Confirm fluid compatibility, port configuration, tightening torque, circuit design, and model-specific requirements using the manufacturer’s documentation before operation. Specifications and available configurations vary by model.\u003c\/p\u003e","brand":"miniBooster","offers":[{"title":"Default Title","offer_id":53697156907301,"sku":"HC2-1.2-B-1","price":1320.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0252\/8375\/6086\/files\/HC2-1_f7302323-cf7c-4c76-a6a1-21f61a494047.png?v=1787964374"},{"product_id":"hc2-1-5-b-1-minibooster-pressure-intensifier-1-5-ratio-1-4-bspp-inlet-port-1-4-bspp-outlet-port-3-2gpm-and-3000psi-inlet-1-1gpm-and-11600psi-outlet-with-dump-valve","title":"HC2-1.5-B-1 miniBooster Pressure Intensifier, 1.5 Ratio, 1\/4\" BSPP Inlet Port, 1\/4\" BSPP Outlet Port, 3.2GPM and 3000psi Inlet, 1.1GPM and 11600psi Outlet, With Dump Valve","description":"\u003cp\u003eThe miniBOOSTER HC2 Hydraulic Intensifier is a compact, inline pressure booster designed to generate and maintain high hydraulic pressure using an existing low-pressure supply. Weighing only 2.2 lb (1.0 kg), the HC2 automatically increases outlet pressure and compensates for minor oil consumption or leakage to maintain the required pressure. It is available with 15 intensification ratios from 1.2:1 to 25:1, inlet pressures from 20 to 207 bar (290 to 3,000 psi), and maximum outlet pressure up to 800 bar (11,600 psi). Outlet pressure is controlled by varying the supplied inlet pressure. Available configurations include the HC2-A without a dump valve, HC2-B with an integrated dump valve, and HC2-G with proportional pressure control, with BSPP or UNF port options. Typical applications include hydraulic workholding, clamping systems, machine tools, industrial automation, testing equipment, and compact machinery requiring high pressure from a conventional hydraulic power source.\u003c\/p\u003e\n\n\u003cp\u003eWarning: Hydraulic intensifiers can generate extremely high pressure. Select the correct intensification ratio and verify that all hoses, fittings, valves, gauges, actuators, and other downstream components are rated for the maximum possible outlet pressure. Never exceed the HC2’s specified inlet pressure, outlet pressure, or flow limits, and keep return-line pressure as low as possible because backpressure affects available outlet pressure. Installation, adjustment, and service should be performed only by qualified hydraulic personnel with the system completely depressurized. Confirm fluid compatibility, port configuration, tightening torque, circuit design, and model-specific requirements using the manufacturer’s documentation before operation. Specifications and available configurations vary by model.\u003c\/p\u003e","brand":"miniBooster","offers":[{"title":"Default Title","offer_id":53697157169445,"sku":"HC2-1.5-B-1","price":1320.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0252\/8375\/6086\/files\/HC2-1_d7e4b3f2-1e3f-408c-a042-5aacb90eb37a.png?v=1787964382"},{"product_id":"hc2-1-5-b-2-minibooster-pressure-intensifier-1-5-ratio-7-16-20-unf-inlet-port-9-16-18-unf-outlet-port-3-2gpm-and-3000psi-inlet-1-1gpm-and-11600psi-outlet-with-dump-valve","title":"HC2-1.5-B-2 miniBooster Pressure Intensifier, 1.5 Ratio, 7\/16-20 UNF Inlet Port, 9\/16-18 UNF Outlet Port, 3.2GPM and 3000psi Inlet, 1.1GPM and 11600psi Outlet, With Dump Valve","description":"\u003cp\u003eThe miniBOOSTER HC2 Hydraulic Intensifier is a compact, inline pressure booster designed to generate and maintain high hydraulic pressure using an existing low-pressure supply. Weighing only 2.2 lb (1.0 kg), the HC2 automatically increases outlet pressure and compensates for minor oil consumption or leakage to maintain the required pressure. It is available with 15 intensification ratios from 1.2:1 to 25:1, inlet pressures from 20 to 207 bar (290 to 3,000 psi), and maximum outlet pressure up to 800 bar (11,600 psi). Outlet pressure is controlled by varying the supplied inlet pressure. Available configurations include the HC2-A without a dump valve, HC2-B with an integrated dump valve, and HC2-G with proportional pressure control, with BSPP or UNF port options. Typical applications include hydraulic workholding, clamping systems, machine tools, industrial automation, testing equipment, and compact machinery requiring high pressure from a conventional hydraulic power source.\u003c\/p\u003e\n\n\u003cp\u003eWarning: Hydraulic intensifiers can generate extremely high pressure. Select the correct intensification ratio and verify that all hoses, fittings, valves, gauges, actuators, and other downstream components are rated for the maximum possible outlet pressure. Never exceed the HC2’s specified inlet pressure, outlet pressure, or flow limits, and keep return-line pressure as low as possible because backpressure affects available outlet pressure. Installation, adjustment, and service should be performed only by qualified hydraulic personnel with the system completely depressurized. Confirm fluid compatibility, port configuration, tightening torque, circuit design, and model-specific requirements using the manufacturer’s documentation before operation. Specifications and available configurations vary by model.\u003c\/p\u003e","brand":"miniBooster","offers":[{"title":"Default Title","offer_id":53697157267749,"sku":"HC2-1.5-B-2","price":1320.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0252\/8375\/6086\/files\/HC2-1_1d8de483-f852-4965-b2e5-20a6c20fe830.png?v=1787964389"},{"product_id":"hc2-2-0-b-1-minibooster-pressure-intensifier-2-0-ratio-1-4-bspp-inlet-port-1-4-bspp-outlet-port-3-2gpm-and-3000psi-inlet-0-8gpm-and-11600psi-outlet-with-dump-valve","title":"HC2-2.0-B-1 miniBooster Pressure Intensifier, 2.0 Ratio, 1\/4\" BSPP Inlet Port, 1\/4\" BSPP Outlet Port, 3.2GPM and 3000psi Inlet, 0.8GPM and 11600psi Outlet, With Dump Valve","description":"\u003cp\u003eThe miniBOOSTER HC2 Hydraulic Intensifier is a compact, inline pressure booster designed to generate and maintain high hydraulic pressure using an existing low-pressure supply. Weighing only 2.2 lb (1.0 kg), the HC2 automatically increases outlet pressure and compensates for minor oil consumption or leakage to maintain the required pressure. It is available with 15 intensification ratios from 1.2:1 to 25:1, inlet pressures from 20 to 207 bar (290 to 3,000 psi), and maximum outlet pressure up to 800 bar (11,600 psi). Outlet pressure is controlled by varying the supplied inlet pressure. Available configurations include the HC2-A without a dump valve, HC2-B with an integrated dump valve, and HC2-G with proportional pressure control, with BSPP or UNF port options. Typical applications include hydraulic workholding, clamping systems, machine tools, industrial automation, testing equipment, and compact machinery requiring high pressure from a conventional hydraulic power source.\u003c\/p\u003e\n\n\u003cp\u003eWarning: Hydraulic intensifiers can generate extremely high pressure. Select the correct intensification ratio and verify that all hoses, fittings, valves, gauges, actuators, and other downstream components are rated for the maximum possible outlet pressure. Never exceed the HC2’s specified inlet pressure, outlet pressure, or flow limits, and keep return-line pressure as low as possible because backpressure affects available outlet pressure. Installation, adjustment, and service should be performed only by qualified hydraulic personnel with the system completely depressurized. Confirm fluid compatibility, port configuration, tightening torque, circuit design, and model-specific requirements using the manufacturer’s documentation before operation. Specifications and available configurations vary by model.\u003c\/p\u003e","brand":"miniBooster","offers":[{"title":"Default Title","offer_id":53697157562661,"sku":"HC2-2.0-B-1","price":1320.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0252\/8375\/6086\/files\/HC2-1_d8a7614c-6243-41e2-9872-e0e9c3727e3f.png?v=1787964398"},{"product_id":"hc2-2-0-b-2-minibooster-pressure-intensifier-2-0-ratio-7-16-20-unf-inlet-port-9-16-18-unf-outlet-port-3-2gpm-and-3000psi-inlet-0-8gpm-and-11600psi-outlet-with-dump-valve","title":"HC2-2.0-B-2 miniBooster Pressure Intensifier, 2.0 Ratio, 7\/16-20 UNF Inlet Port, 9\/16-18 UNF Outlet Port, 3.2GPM and 3000psi Inlet, 0.8GPM and 11600psi Outlet, With Dump Valve","description":"\u003cp\u003eThe miniBOOSTER HC2 Hydraulic Intensifier is a compact, inline pressure booster designed to generate and maintain high hydraulic pressure using an existing low-pressure supply. Weighing only 2.2 lb (1.0 kg), the HC2 automatically increases outlet pressure and compensates for minor oil consumption or leakage to maintain the required pressure. It is available with 15 intensification ratios from 1.2:1 to 25:1, inlet pressures from 20 to 207 bar (290 to 3,000 psi), and maximum outlet pressure up to 800 bar (11,600 psi). Outlet pressure is controlled by varying the supplied inlet pressure. Available configurations include the HC2-A without a dump valve, HC2-B with an integrated dump valve, and HC2-G with proportional pressure control, with BSPP or UNF port options. Typical applications include hydraulic workholding, clamping systems, machine tools, industrial automation, testing equipment, and compact machinery requiring high pressure from a conventional hydraulic power source.\u003c\/p\u003e\n\n\u003cp\u003eWarning: Hydraulic intensifiers can generate extremely high pressure. Select the correct intensification ratio and verify that all hoses, fittings, valves, gauges, actuators, and other downstream components are rated for the maximum possible outlet pressure. Never exceed the HC2’s specified inlet pressure, outlet pressure, or flow limits, and keep return-line pressure as low as possible because backpressure affects available outlet pressure. Installation, adjustment, and service should be performed only by qualified hydraulic personnel with the system completely depressurized. Confirm fluid compatibility, port configuration, tightening torque, circuit design, and model-specific requirements using the manufacturer’s documentation before operation. Specifications and available configurations vary by model.\u003c\/p\u003e","brand":"miniBooster","offers":[{"title":"Default Title","offer_id":53697157595429,"sku":"HC2-2.0-B-2","price":1320.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0252\/8375\/6086\/files\/HC2-1_dd3b9d6b-0913-4727-bcd7-56f55b10a47d.png?v=1787964398"},{"product_id":"hc2-2-2-b-1-minibooster-pressure-intensifier-2-2-ratio-1-4-bspp-inlet-port-1-4-bspp-outlet-port-3-2gpm-and-3000psi-inlet-0-8gpm-and-11600psi-outlet-with-dump-valve","title":"HC2-2.2-B-1 miniBooster Pressure Intensifier, 2.2 Ratio, 1\/4\" BSPP Inlet Port, 1\/4\" BSPP Outlet Port, 3.2GPM and 3000psi Inlet, 0.8GPM and 11600psi Outlet, With Dump Valve","description":"\u003cp\u003eThe miniBOOSTER HC2 Hydraulic Intensifier is a compact, inline pressure booster designed to generate and maintain high hydraulic pressure using an existing low-pressure supply. Weighing only 2.2 lb (1.0 kg), the HC2 automatically increases outlet pressure and compensates for minor oil consumption or leakage to maintain the required pressure. It is available with 15 intensification ratios from 1.2:1 to 25:1, inlet pressures from 20 to 207 bar (290 to 3,000 psi), and maximum outlet pressure up to 800 bar (11,600 psi). Outlet pressure is controlled by varying the supplied inlet pressure. Available configurations include the HC2-A without a dump valve, HC2-B with an integrated dump valve, and HC2-G with proportional pressure control, with BSPP or UNF port options. Typical applications include hydraulic workholding, clamping systems, machine tools, industrial automation, testing equipment, and compact machinery requiring high pressure from a conventional hydraulic power source.\u003c\/p\u003e\n\n\u003cp\u003eWarning: Hydraulic intensifiers can generate extremely high pressure. Select the correct intensification ratio and verify that all hoses, fittings, valves, gauges, actuators, and other downstream components are rated for the maximum possible outlet pressure. Never exceed the HC2’s specified inlet pressure, outlet pressure, or flow limits, and keep return-line pressure as low as possible because backpressure affects available outlet pressure. Installation, adjustment, and service should be performed only by qualified hydraulic personnel with the system completely depressurized. Confirm fluid compatibility, port configuration, tightening torque, circuit design, and model-specific requirements using the manufacturer’s documentation before operation. Specifications and available configurations vary by model.\u003c\/p\u003e","brand":"miniBooster","offers":[{"title":"Default Title","offer_id":53697157759269,"sku":"HC2-2.2-B-1","price":1320.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0252\/8375\/6086\/files\/HC2-1_1680e859-00c9-4c7e-9cf4-f87e582b494a.png?v=1787964407"},{"product_id":"hc2-2-2-b-2-minibooster-pressure-intensifier-2-2-ratio-7-16-20-unf-inlet-port-9-16-18-unf-outlet-port-3-2gpm-and-3000psi-inlet-0-8gpm-and-11600psi-outlet-with-dump-valve","title":"HC2-2.2-B-2 miniBooster Pressure Intensifier, 2.2 Ratio, 7\/16-20 UNF Inlet Port, 9\/16-18 UNF Outlet Port, 3.2GPM and 3000psi Inlet, 0.8GPM and 11600psi Outlet, With Dump Valve","description":"\u003cp\u003eThe miniBOOSTER HC2 Hydraulic Intensifier is a compact, inline pressure booster designed to generate and maintain high hydraulic pressure using an existing low-pressure supply. Weighing only 2.2 lb (1.0 kg), the HC2 automatically increases outlet pressure and compensates for minor oil consumption or leakage to maintain the required pressure. It is available with 15 intensification ratios from 1.2:1 to 25:1, inlet pressures from 20 to 207 bar (290 to 3,000 psi), and maximum outlet pressure up to 800 bar (11,600 psi). Outlet pressure is controlled by varying the supplied inlet pressure. Available configurations include the HC2-A without a dump valve, HC2-B with an integrated dump valve, and HC2-G with proportional pressure control, with BSPP or UNF port options. Typical applications include hydraulic workholding, clamping systems, machine tools, industrial automation, testing equipment, and compact machinery requiring high pressure from a conventional hydraulic power source.\u003c\/p\u003e\n\n\u003cp\u003eWarning: Hydraulic intensifiers can generate extremely high pressure. Select the correct intensification ratio and verify that all hoses, fittings, valves, gauges, actuators, and other downstream components are rated for the maximum possible outlet pressure. Never exceed the HC2’s specified inlet pressure, outlet pressure, or flow limits, and keep return-line pressure as low as possible because backpressure affects available outlet pressure. Installation, adjustment, and service should be performed only by qualified hydraulic personnel with the system completely depressurized. Confirm fluid compatibility, port configuration, tightening torque, circuit design, and model-specific requirements using the manufacturer’s documentation before operation. Specifications and available configurations vary by model.\u003c\/p\u003e","brand":"miniBooster","offers":[{"title":"Default Title","offer_id":53697157792037,"sku":"HC2-2.2-B-2","price":1320.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0252\/8375\/6086\/files\/HC2-1_f4854406-d263-4fcd-b849-ab301c91b4c2.png?v=1787964408"},{"product_id":"hc2-2-5-b-1-minibooster-pressure-intensifier-2-5-ratio-1-4-bspp-inlet-port-1-4-bspp-outlet-port-3-4gpm-and-3000psi-inlet-0-7gpm-and-11600psi-outlet-with-dump-valve","title":"HC2-2.5-B-1 miniBooster Pressure Intensifier, 2.5 Ratio, 1\/4\" BSPP Inlet Port, 1\/4\" BSPP Outlet Port, 3.4GPM and 3000psi Inlet, 0.7GPM and 11600psi Outlet, With Dump Valve","description":"\u003cp\u003eThe miniBOOSTER HC2 Hydraulic Intensifier is a compact, inline pressure booster designed to generate and maintain high hydraulic pressure using an existing low-pressure supply. Weighing only 2.2 lb (1.0 kg), the HC2 automatically increases outlet pressure and compensates for minor oil consumption or leakage to maintain the required pressure. It is available with 15 intensification ratios from 1.2:1 to 25:1, inlet pressures from 20 to 207 bar (290 to 3,000 psi), and maximum outlet pressure up to 800 bar (11,600 psi). Outlet pressure is controlled by varying the supplied inlet pressure. Available configurations include the HC2-A without a dump valve, HC2-B with an integrated dump valve, and HC2-G with proportional pressure control, with BSPP or UNF port options. Typical applications include hydraulic workholding, clamping systems, machine tools, industrial automation, testing equipment, and compact machinery requiring high pressure from a conventional hydraulic power source.\u003c\/p\u003e\n\n\u003cp\u003eWarning: Hydraulic intensifiers can generate extremely high pressure. Select the correct intensification ratio and verify that all hoses, fittings, valves, gauges, actuators, and other downstream components are rated for the maximum possible outlet pressure. Never exceed the HC2’s specified inlet pressure, outlet pressure, or flow limits, and keep return-line pressure as low as possible because backpressure affects available outlet pressure. Installation, adjustment, and service should be performed only by qualified hydraulic personnel with the system completely depressurized. Confirm fluid compatibility, port configuration, tightening torque, circuit design, and model-specific requirements using the manufacturer’s documentation before operation. Specifications and available configurations vary by model.\u003c\/p\u003e","brand":"miniBooster","offers":[{"title":"Default Title","offer_id":53697157955877,"sku":"HC2-2.5-B-1","price":1320.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0252\/8375\/6086\/files\/HC2-1_c801730c-f90e-4bab-a0df-253a77562d53.png?v=1787964416"},{"product_id":"hc2-2-5-b-2-minibooster-pressure-intensifier-2-5-ratio-7-16-20-unf-inlet-port-9-16-18-unf-outlet-port-3-4gpm-and-3000psi-inlet-0-7gpm-and-11600psi-outlet-with-dump-valve","title":"HC2-2.5-B-2 miniBooster Pressure Intensifier, 2.5 Ratio, 7\/16-20 UNF Inlet Port, 9\/16-18 UNF Outlet Port, 3.4GPM and 3000psi Inlet, 0.7GPM and 11600psi Outlet, With Dump Valve","description":"\u003cp\u003eThe miniBOOSTER HC2 Hydraulic Intensifier is a compact, inline pressure booster designed to generate and maintain high hydraulic pressure using an existing low-pressure supply. Weighing only 2.2 lb (1.0 kg), the HC2 automatically increases outlet pressure and compensates for minor oil consumption or leakage to maintain the required pressure. It is available with 15 intensification ratios from 1.2:1 to 25:1, inlet pressures from 20 to 207 bar (290 to 3,000 psi), and maximum outlet pressure up to 800 bar (11,600 psi). Outlet pressure is controlled by varying the supplied inlet pressure. Available configurations include the HC2-A without a dump valve, HC2-B with an integrated dump valve, and HC2-G with proportional pressure control, with BSPP or UNF port options. Typical applications include hydraulic workholding, clamping systems, machine tools, industrial automation, testing equipment, and compact machinery requiring high pressure from a conventional hydraulic power source.\u003c\/p\u003e\n\n\u003cp\u003eWarning: Hydraulic intensifiers can generate extremely high pressure. Select the correct intensification ratio and verify that all hoses, fittings, valves, gauges, actuators, and other downstream components are rated for the maximum possible outlet pressure. Never exceed the HC2’s specified inlet pressure, outlet pressure, or flow limits, and keep return-line pressure as low as possible because backpressure affects available outlet pressure. Installation, adjustment, and service should be performed only by qualified hydraulic personnel with the system completely depressurized. Confirm fluid compatibility, port configuration, tightening torque, circuit design, and model-specific requirements using the manufacturer’s documentation before operation. Specifications and available configurations vary by model.\u003c\/p\u003e","brand":"miniBooster","offers":[{"title":"Default Title","offer_id":53697158021413,"sku":"HC2-2.5-B-2","price":1320.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0252\/8375\/6086\/files\/HC2-1_7197852d-7544-47d1-ad03-4aa10a207d7c.png?v=1787964422"},{"product_id":"hc2-2-8-b-1-minibooster-pressure-intensifier-2-8-ratio-1-4-bspp-inlet-port-1-4-bspp-outlet-port-3-4gpm-and-3000psi-inlet-0-7gpm-and-11600psi-outlet-with-dump-valve","title":"HC2-2.8-B-1 miniBooster Pressure Intensifier, 2.8 Ratio, 1\/4\" BSPP Inlet Port, 1\/4\" BSPP Outlet Port, 3.4GPM and 3000psi Inlet, 0.7GPM and 11600psi Outlet, With Dump Valve","description":"\u003cp\u003eThe miniBOOSTER HC2 Hydraulic Intensifier is a compact, inline pressure booster designed to generate and maintain high hydraulic pressure using an existing low-pressure supply. Weighing only 2.2 lb (1.0 kg), the HC2 automatically increases outlet pressure and compensates for minor oil consumption or leakage to maintain the required pressure. It is available with 15 intensification ratios from 1.2:1 to 25:1, inlet pressures from 20 to 207 bar (290 to 3,000 psi), and maximum outlet pressure up to 800 bar (11,600 psi). Outlet pressure is controlled by varying the supplied inlet pressure. Available configurations include the HC2-A without a dump valve, HC2-B with an integrated dump valve, and HC2-G with proportional pressure control, with BSPP or UNF port options. Typical applications include hydraulic workholding, clamping systems, machine tools, industrial automation, testing equipment, and compact machinery requiring high pressure from a conventional hydraulic power source.\u003c\/p\u003e\n\n\u003cp\u003eWarning: Hydraulic intensifiers can generate extremely high pressure. Select the correct intensification ratio and verify that all hoses, fittings, valves, gauges, actuators, and other downstream components are rated for the maximum possible outlet pressure. Never exceed the HC2’s specified inlet pressure, outlet pressure, or flow limits, and keep return-line pressure as low as possible because backpressure affects available outlet pressure. Installation, adjustment, and service should be performed only by qualified hydraulic personnel with the system completely depressurized. Confirm fluid compatibility, port configuration, tightening torque, circuit design, and model-specific requirements using the manufacturer’s documentation before operation. Specifications and available configurations vary by model.\u003c\/p\u003e","brand":"miniBooster","offers":[{"title":"Default Title","offer_id":53697158381861,"sku":"HC2-2.8-B-1","price":1320.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0252\/8375\/6086\/files\/HC2-1_f04a3bcc-9a2e-463c-8eca-b9be40a4b9be.png?v=1787964431"},{"product_id":"hc2-2-8-b-2-minibooster-pressure-intensifier-2-8-ratio-7-16-20-unf-inlet-port-9-16-18-unf-outlet-port-3-4gpm-and-3000psi-inlet-0-7gpm-and-11600psi-outlet-with-dump-valve","title":"HC2-2.8-B-2 miniBooster Pressure Intensifier, 2.8 Ratio, 7\/16-20 UNF Inlet Port, 9\/16-18 UNF Outlet Port, 3.4GPM and 3000psi Inlet, 0.7GPM and 11600psi Outlet, With Dump Valve","description":"\u003cp\u003eThe miniBOOSTER HC2 Hydraulic Intensifier is a compact, inline pressure booster designed to generate and maintain high hydraulic pressure using an existing low-pressure supply. Weighing only 2.2 lb (1.0 kg), the HC2 automatically increases outlet pressure and compensates for minor oil consumption or leakage to maintain the required pressure. It is available with 15 intensification ratios from 1.2:1 to 25:1, inlet pressures from 20 to 207 bar (290 to 3,000 psi), and maximum outlet pressure up to 800 bar (11,600 psi). Outlet pressure is controlled by varying the supplied inlet pressure. Available configurations include the HC2-A without a dump valve, HC2-B with an integrated dump valve, and HC2-G with proportional pressure control, with BSPP or UNF port options. Typical applications include hydraulic workholding, clamping systems, machine tools, industrial automation, testing equipment, and compact machinery requiring high pressure from a conventional hydraulic power source.\u003c\/p\u003e\n\n\u003cp\u003eWarning: Hydraulic intensifiers can generate extremely high pressure. Select the correct intensification ratio and verify that all hoses, fittings, valves, gauges, actuators, and other downstream components are rated for the maximum possible outlet pressure. Never exceed the HC2’s specified inlet pressure, outlet pressure, or flow limits, and keep return-line pressure as low as possible because backpressure affects available outlet pressure. Installation, adjustment, and service should be performed only by qualified hydraulic personnel with the system completely depressurized. Confirm fluid compatibility, port configuration, tightening torque, circuit design, and model-specific requirements using the manufacturer’s documentation before operation. Specifications and available configurations vary by model.\u003c\/p\u003e","brand":"miniBooster","offers":[{"title":"Default Title","offer_id":53697158414629,"sku":"HC2-2.8-B-2","price":1320.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0252\/8375\/6086\/files\/HC2-1_4aa193eb-663a-451b-8a57-257199ede176.png?v=1787964434"},{"product_id":"hc2-3-2-b-1-minibooster-pressure-intensifier-3-2-ratio-1-4-bspp-inlet-port-1-4-bspp-outlet-port-4gpm-and-3000psi-inlet-0-7gpm-and-11600psi-outlet-with-dump-valve","title":"HC2-3.2-B-1 miniBooster Pressure Intensifier, 3.2 Ratio, 1\/4\" BSPP Inlet Port, 1\/4\" BSPP Outlet Port, 4GPM and 3000psi Inlet, 0.7GPM and 11600psi Outlet, With Dump Valve","description":"\u003cp\u003eThe miniBOOSTER HC2 Hydraulic Intensifier is a compact, inline pressure booster designed to generate and maintain high hydraulic pressure using an existing low-pressure supply. Weighing only 2.2 lb (1.0 kg), the HC2 automatically increases outlet pressure and compensates for minor oil consumption or leakage to maintain the required pressure. It is available with 15 intensification ratios from 1.2:1 to 25:1, inlet pressures from 20 to 207 bar (290 to 3,000 psi), and maximum outlet pressure up to 800 bar (11,600 psi). Outlet pressure is controlled by varying the supplied inlet pressure. Available configurations include the HC2-A without a dump valve, HC2-B with an integrated dump valve, and HC2-G with proportional pressure control, with BSPP or UNF port options. Typical applications include hydraulic workholding, clamping systems, machine tools, industrial automation, testing equipment, and compact machinery requiring high pressure from a conventional hydraulic power source.\u003c\/p\u003e\n\n\u003cp\u003eWarning: Hydraulic intensifiers can generate extremely high pressure. Select the correct intensification ratio and verify that all hoses, fittings, valves, gauges, actuators, and other downstream components are rated for the maximum possible outlet pressure. Never exceed the HC2’s specified inlet pressure, outlet pressure, or flow limits, and keep return-line pressure as low as possible because backpressure affects available outlet pressure. Installation, adjustment, and service should be performed only by qualified hydraulic personnel with the system completely depressurized. Confirm fluid compatibility, port configuration, tightening torque, circuit design, and model-specific requirements using the manufacturer’s documentation before operation. Specifications and available configurations vary by model.\u003c\/p\u003e","brand":"miniBooster","offers":[{"title":"Default Title","offer_id":53697158578469,"sku":"HC2-3.2-B-1","price":1320.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0252\/8375\/6086\/files\/HC2-1_54c1d9c4-02fd-444c-8fb2-62a222301f4b.png?v=1787964441"},{"product_id":"hc2-3-2-b-2-minibooster-pressure-intensifier-3-2-ratio-7-16-20-unf-inlet-port-9-16-18-unf-outlet-port-4gpm-and-3000psi-inlet-0-7gpm-and-11600psi-outlet-with-dump-valve","title":"HC2-3.2-B-2 miniBooster Pressure Intensifier, 3.2 Ratio, 7\/16-20 UNF Inlet Port, 9\/16-18 UNF Outlet Port, 4GPM and 3000psi Inlet, 0.7GPM and 11600psi Outlet, With Dump Valve","description":"\u003cp\u003eThe miniBOOSTER HC2 Hydraulic Intensifier is a compact, inline pressure booster designed to generate and maintain high hydraulic pressure using an existing low-pressure supply. Weighing only 2.2 lb (1.0 kg), the HC2 automatically increases outlet pressure and compensates for minor oil consumption or leakage to maintain the required pressure. It is available with 15 intensification ratios from 1.2:1 to 25:1, inlet pressures from 20 to 207 bar (290 to 3,000 psi), and maximum outlet pressure up to 800 bar (11,600 psi). Outlet pressure is controlled by varying the supplied inlet pressure. Available configurations include the HC2-A without a dump valve, HC2-B with an integrated dump valve, and HC2-G with proportional pressure control, with BSPP or UNF port options. Typical applications include hydraulic workholding, clamping systems, machine tools, industrial automation, testing equipment, and compact machinery requiring high pressure from a conventional hydraulic power source.\u003c\/p\u003e\n\n\u003cp\u003eWarning: Hydraulic intensifiers can generate extremely high pressure. Select the correct intensification ratio and verify that all hoses, fittings, valves, gauges, actuators, and other downstream components are rated for the maximum possible outlet pressure. Never exceed the HC2’s specified inlet pressure, outlet pressure, or flow limits, and keep return-line pressure as low as possible because backpressure affects available outlet pressure. Installation, adjustment, and service should be performed only by qualified hydraulic personnel with the system completely depressurized. Confirm fluid compatibility, port configuration, tightening torque, circuit design, and model-specific requirements using the manufacturer’s documentation before operation. Specifications and available configurations vary by model.\u003c\/p\u003e","brand":"miniBooster","offers":[{"title":"Default Title","offer_id":53697158611237,"sku":"HC2-3.2-B-2","price":1320.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0252\/8375\/6086\/files\/HC2-1_af2e4b70-c907-43e7-b8b0-87d8d674c319.png?v=1787964442"},{"product_id":"hc2-4-0-b-1-minibooster-pressure-intensifier-4-0-ratio-1-4-bspp-inlet-port-1-4-bspp-outlet-port-3-7gpm-and-3000psi-inlet-0-5gpm-and-11600psi-outlet-with-dump-valve","title":"HC2-4.0-B-1 miniBooster Pressure Intensifier, 4.0 Ratio, 1\/4\" BSPP Inlet Port, 1\/4\" BSPP Outlet Port, 3.7GPM and 3000psi Inlet, 0.5GPM and 11600psi Outlet, With Dump Valve","description":"\u003cp\u003eThe miniBOOSTER HC2 Hydraulic Intensifier is a compact, inline pressure booster designed to generate and maintain high hydraulic pressure using an existing low-pressure supply. Weighing only 2.2 lb (1.0 kg), the HC2 automatically increases outlet pressure and compensates for minor oil consumption or leakage to maintain the required pressure. It is available with 15 intensification ratios from 1.2:1 to 25:1, inlet pressures from 20 to 207 bar (290 to 3,000 psi), and maximum outlet pressure up to 800 bar (11,600 psi). Outlet pressure is controlled by varying the supplied inlet pressure. Available configurations include the HC2-A without a dump valve, HC2-B with an integrated dump valve, and HC2-G with proportional pressure control, with BSPP or UNF port options. Typical applications include hydraulic workholding, clamping systems, machine tools, industrial automation, testing equipment, and compact machinery requiring high pressure from a conventional hydraulic power source.\u003c\/p\u003e\n\n\u003cp\u003eWarning: Hydraulic intensifiers can generate extremely high pressure. Select the correct intensification ratio and verify that all hoses, fittings, valves, gauges, actuators, and other downstream components are rated for the maximum possible outlet pressure. Never exceed the HC2’s specified inlet pressure, outlet pressure, or flow limits, and keep return-line pressure as low as possible because backpressure affects available outlet pressure. Installation, adjustment, and service should be performed only by qualified hydraulic personnel with the system completely depressurized. Confirm fluid compatibility, port configuration, tightening torque, circuit design, and model-specific requirements using the manufacturer’s documentation before operation. Specifications and available configurations vary by model.\u003c\/p\u003e","brand":"miniBooster","offers":[{"title":"Default Title","offer_id":53697158807845,"sku":"HC2-4.0-B-1","price":1320.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0252\/8375\/6086\/files\/HC2-1_68098fe6-5562-4fc0-a71a-f0f4fe55fee7.png?v=1787964456"},{"product_id":"hc2-4-0-b-2-minibooster-pressure-intensifier-4-0-ratio-7-16-20-unf-inlet-port-9-16-18-unf-outlet-port-3-7gpm-and-3000psi-inlet-0-5gpm-and-11600psi-outlet-with-dump-valve","title":"HC2-4.0-B-2 miniBooster Pressure Intensifier, 4.0 Ratio, 7\/16-20 UNF Inlet Port, 9\/16-18 UNF Outlet Port, 3.7GPM and 3000psi Inlet, 0.5GPM and 11600psi Outlet, With Dump Valve","description":"\u003cp\u003eThe miniBOOSTER HC2 Hydraulic Intensifier is a compact, inline pressure booster designed to generate and maintain high hydraulic pressure using an existing low-pressure supply. Weighing only 2.2 lb (1.0 kg), the HC2 automatically increases outlet pressure and compensates for minor oil consumption or leakage to maintain the required pressure. It is available with 15 intensification ratios from 1.2:1 to 25:1, inlet pressures from 20 to 207 bar (290 to 3,000 psi), and maximum outlet pressure up to 800 bar (11,600 psi). Outlet pressure is controlled by varying the supplied inlet pressure. Available configurations include the HC2-A without a dump valve, HC2-B with an integrated dump valve, and HC2-G with proportional pressure control, with BSPP or UNF port options. Typical applications include hydraulic workholding, clamping systems, machine tools, industrial automation, testing equipment, and compact machinery requiring high pressure from a conventional hydraulic power source.\u003c\/p\u003e\n\n\u003cp\u003eWarning: Hydraulic intensifiers can generate extremely high pressure. Select the correct intensification ratio and verify that all hoses, fittings, valves, gauges, actuators, and other downstream components are rated for the maximum possible outlet pressure. Never exceed the HC2’s specified inlet pressure, outlet pressure, or flow limits, and keep return-line pressure as low as possible because backpressure affects available outlet pressure. Installation, adjustment, and service should be performed only by qualified hydraulic personnel with the system completely depressurized. Confirm fluid compatibility, port configuration, tightening torque, circuit design, and model-specific requirements using the manufacturer’s documentation before operation. Specifications and available configurations vary by model.\u003c\/p\u003e","brand":"miniBooster","offers":[{"title":"Default Title","offer_id":53697158840613,"sku":"HC2-4.0-B-2","price":1320.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0252\/8375\/6086\/files\/HC2-1_c4f67d56-02f3-4ed3-836e-5f5aa36be99d.png?v=1787964456"},{"product_id":"hc2-5-0-b-1-minibooster-pressure-intensifier-5-0-ratio-1-4-bspp-inlet-port-1-4-bspp-outlet-port-3-7gpm-and-3000psi-inlet-0-4gpm-and-11600psi-outlet-with-dump-valve","title":"HC2-5.0-B-1 miniBooster Pressure Intensifier, 5.0 Ratio, 1\/4\" BSPP Inlet Port, 1\/4\" BSPP Outlet Port, 3.7GPM and 3000psi Inlet, 0.4GPM and 11600psi Outlet, With Dump Valve","description":"\u003cp\u003eThe miniBOOSTER HC2 Hydraulic Intensifier is a compact, inline pressure booster designed to generate and maintain high hydraulic pressure using an existing low-pressure supply. Weighing only 2.2 lb (1.0 kg), the HC2 automatically increases outlet pressure and compensates for minor oil consumption or leakage to maintain the required pressure. It is available with 15 intensification ratios from 1.2:1 to 25:1, inlet pressures from 20 to 207 bar (290 to 3,000 psi), and maximum outlet pressure up to 800 bar (11,600 psi). Outlet pressure is controlled by varying the supplied inlet pressure. Available configurations include the HC2-A without a dump valve, HC2-B with an integrated dump valve, and HC2-G with proportional pressure control, with BSPP or UNF port options. Typical applications include hydraulic workholding, clamping systems, machine tools, industrial automation, testing equipment, and compact machinery requiring high pressure from a conventional hydraulic power source.\u003c\/p\u003e\n\n\u003cp\u003eWarning: Hydraulic intensifiers can generate extremely high pressure. Select the correct intensification ratio and verify that all hoses, fittings, valves, gauges, actuators, and other downstream components are rated for the maximum possible outlet pressure. Never exceed the HC2’s specified inlet pressure, outlet pressure, or flow limits, and keep return-line pressure as low as possible because backpressure affects available outlet pressure. Installation, adjustment, and service should be performed only by qualified hydraulic personnel with the system completely depressurized. Confirm fluid compatibility, port configuration, tightening torque, circuit design, and model-specific requirements using the manufacturer’s documentation before operation. Specifications and available configurations vary by model.\u003c\/p\u003e","brand":"miniBooster","offers":[{"title":"Default Title","offer_id":53697159659813,"sku":"HC2-5.0-B-1","price":1320.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0252\/8375\/6086\/files\/HC2-1_7426b393-e3cf-4c2e-929b-51f13277c7ee.png?v=1787964464"},{"product_id":"hc2-5-0-b-2-minibooster-pressure-intensifier-5-0-ratio-7-16-20-unf-inlet-port-9-16-18-unf-outlet-port-3-7gpm-and-3000psi-inlet-0-4gpm-and-11600psi-outlet-with-dump-valve","title":"HC2-5.0-B-2 miniBooster Pressure Intensifier, 5.0 Ratio, 7\/16-20 UNF Inlet Port, 9\/16-18 UNF Outlet Port, 3.7GPM and 3000psi Inlet, 0.4GPM and 11600psi Outlet, With Dump Valve","description":"\u003cp\u003eThe miniBOOSTER HC2 Hydraulic Intensifier is a compact, inline pressure booster designed to generate and maintain high hydraulic pressure using an existing low-pressure supply. Weighing only 2.2 lb (1.0 kg), the HC2 automatically increases outlet pressure and compensates for minor oil consumption or leakage to maintain the required pressure. It is available with 15 intensification ratios from 1.2:1 to 25:1, inlet pressures from 20 to 207 bar (290 to 3,000 psi), and maximum outlet pressure up to 800 bar (11,600 psi). Outlet pressure is controlled by varying the supplied inlet pressure. Available configurations include the HC2-A without a dump valve, HC2-B with an integrated dump valve, and HC2-G with proportional pressure control, with BSPP or UNF port options. Typical applications include hydraulic workholding, clamping systems, machine tools, industrial automation, testing equipment, and compact machinery requiring high pressure from a conventional hydraulic power source.\u003c\/p\u003e\n\n\u003cp\u003eWarning: Hydraulic intensifiers can generate extremely high pressure. Select the correct intensification ratio and verify that all hoses, fittings, valves, gauges, actuators, and other downstream components are rated for the maximum possible outlet pressure. Never exceed the HC2’s specified inlet pressure, outlet pressure, or flow limits, and keep return-line pressure as low as possible because backpressure affects available outlet pressure. Installation, adjustment, and service should be performed only by qualified hydraulic personnel with the system completely depressurized. Confirm fluid compatibility, port configuration, tightening torque, circuit design, and model-specific requirements using the manufacturer’s documentation before operation. Specifications and available configurations vary by model.\u003c\/p\u003e","brand":"miniBooster","offers":[{"title":"Default Title","offer_id":53697159758117,"sku":"HC2-5.0-B-2","price":1320.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0252\/8375\/6086\/files\/HC2-1_786438ea-4a98-460c-95a0-195f4393f3ea.png?v=1787964465"},{"product_id":"hc2-6-6-b-1-minibooster-pressure-intensifier-6-6-ratio-1-4-bspp-inlet-port-1-4-bspp-outlet-port-3-4gpm-and-3000psi-inlet-0-3gpm-and-11600psi-outlet-with-dump-valve","title":"HC2-6.6-B-1 miniBooster Pressure Intensifier, 6.6 Ratio, 1\/4\" BSPP Inlet Port, 1\/4\" BSPP Outlet Port, 3.4GPM and 3000psi Inlet, 0.3GPM and 11600psi Outlet, With Dump Valve","description":"\u003cp\u003eThe miniBOOSTER HC2 Hydraulic Intensifier is a compact, inline pressure booster designed to generate and maintain high hydraulic pressure using an existing low-pressure supply. Weighing only 2.2 lb (1.0 kg), the HC2 automatically increases outlet pressure and compensates for minor oil consumption or leakage to maintain the required pressure. It is available with 15 intensification ratios from 1.2:1 to 25:1, inlet pressures from 20 to 207 bar (290 to 3,000 psi), and maximum outlet pressure up to 800 bar (11,600 psi). Outlet pressure is controlled by varying the supplied inlet pressure. Available configurations include the HC2-A without a dump valve, HC2-B with an integrated dump valve, and HC2-G with proportional pressure control, with BSPP or UNF port options. Typical applications include hydraulic workholding, clamping systems, machine tools, industrial automation, testing equipment, and compact machinery requiring high pressure from a conventional hydraulic power source.\u003c\/p\u003e\n\n\u003cp\u003eWarning: Hydraulic intensifiers can generate extremely high pressure. Select the correct intensification ratio and verify that all hoses, fittings, valves, gauges, actuators, and other downstream components are rated for the maximum possible outlet pressure. Never exceed the HC2’s specified inlet pressure, outlet pressure, or flow limits, and keep return-line pressure as low as possible because backpressure affects available outlet pressure. Installation, adjustment, and service should be performed only by qualified hydraulic personnel with the system completely depressurized. Confirm fluid compatibility, port configuration, tightening torque, circuit design, and model-specific requirements using the manufacturer’s documentation before operation. Specifications and available configurations vary by model.\u003c\/p\u003e","brand":"miniBooster","offers":[{"title":"Default Title","offer_id":53697160347941,"sku":"HC2-6.6-B-1","price":1320.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0252\/8375\/6086\/files\/HC2-1_9d900bf1-c053-40fb-95b8-fb9052d24187.png?v=1787964479"},{"product_id":"hc2-6-6-b-2-minibooster-pressure-intensifier-6-6-ratio-7-16-20-unf-inlet-port-9-16-18-unf-outlet-port-3-4gpm-and-3000psi-inlet-0-3gpm-and-11600psi-outlet-with-dump-valve","title":"HC2-6.6-B-2 miniBooster Pressure Intensifier, 6.6 Ratio, 7\/16-20 UNF Inlet Port, 9\/16-18 UNF Outlet Port, 3.4GPM and 3000psi Inlet, 0.3GPM and 11600psi Outlet, With Dump Valve","description":"\u003cp\u003eThe miniBOOSTER HC2 Hydraulic Intensifier is a compact, inline pressure booster designed to generate and maintain high hydraulic pressure using an existing low-pressure supply. Weighing only 2.2 lb (1.0 kg), the HC2 automatically increases outlet pressure and compensates for minor oil consumption or leakage to maintain the required pressure. It is available with 15 intensification ratios from 1.2:1 to 25:1, inlet pressures from 20 to 207 bar (290 to 3,000 psi), and maximum outlet pressure up to 800 bar (11,600 psi). Outlet pressure is controlled by varying the supplied inlet pressure. Available configurations include the HC2-A without a dump valve, HC2-B with an integrated dump valve, and HC2-G with proportional pressure control, with BSPP or UNF port options. Typical applications include hydraulic workholding, clamping systems, machine tools, industrial automation, testing equipment, and compact machinery requiring high pressure from a conventional hydraulic power source.\u003c\/p\u003e\n\n\u003cp\u003eWarning: Hydraulic intensifiers can generate extremely high pressure. Select the correct intensification ratio and verify that all hoses, fittings, valves, gauges, actuators, and other downstream components are rated for the maximum possible outlet pressure. Never exceed the HC2’s specified inlet pressure, outlet pressure, or flow limits, and keep return-line pressure as low as possible because backpressure affects available outlet pressure. Installation, adjustment, and service should be performed only by qualified hydraulic personnel with the system completely depressurized. Confirm fluid compatibility, port configuration, tightening torque, circuit design, and model-specific requirements using the manufacturer’s documentation before operation. Specifications and available configurations vary by model.\u003c\/p\u003e","brand":"miniBooster","offers":[{"title":"Default Title","offer_id":53697160380709,"sku":"HC2-6.6-B-2","price":1320.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0252\/8375\/6086\/files\/HC2-1_12118b59-3307-4215-8ff2-45a648bedab8.png?v=1787964480"},{"product_id":"hc2-9-0-b-1-minibooster-pressure-intensifier-9-0-ratio-1-4-bspp-inlet-port-1-4-bspp-outlet-port-3-4gpm-and-3000psi-inlet-0-2gpm-and-11600psi-outlet-with-dump-valve","title":"HC2-9.0-B-1 miniBooster Pressure Intensifier, 9.0 Ratio, 1\/4\" BSPP Inlet Port, 1\/4\" BSPP Outlet Port, 3.4GPM and 3000psi Inlet, 0.2GPM and 11600psi Outlet, With Dump Valve","description":"\u003cp\u003eThe miniBOOSTER HC2 Hydraulic Intensifier is a compact, inline pressure booster designed to generate and maintain high hydraulic pressure using an existing low-pressure supply. Weighing only 2.2 lb (1.0 kg), the HC2 automatically increases outlet pressure and compensates for minor oil consumption or leakage to maintain the required pressure. It is available with 15 intensification ratios from 1.2:1 to 25:1, inlet pressures from 20 to 207 bar (290 to 3,000 psi), and maximum outlet pressure up to 800 bar (11,600 psi). Outlet pressure is controlled by varying the supplied inlet pressure. Available configurations include the HC2-A without a dump valve, HC2-B with an integrated dump valve, and HC2-G with proportional pressure control, with BSPP or UNF port options. Typical applications include hydraulic workholding, clamping systems, machine tools, industrial automation, testing equipment, and compact machinery requiring high pressure from a conventional hydraulic power source.\u003c\/p\u003e\n\n\u003cp\u003eWarning: Hydraulic intensifiers can generate extremely high pressure. Select the correct intensification ratio and verify that all hoses, fittings, valves, gauges, actuators, and other downstream components are rated for the maximum possible outlet pressure. Never exceed the HC2’s specified inlet pressure, outlet pressure, or flow limits, and keep return-line pressure as low as possible because backpressure affects available outlet pressure. Installation, adjustment, and service should be performed only by qualified hydraulic personnel with the system completely depressurized. Confirm fluid compatibility, port configuration, tightening torque, circuit design, and model-specific requirements using the manufacturer’s documentation before operation. Specifications and available configurations vary by model.\u003c\/p\u003e","brand":"miniBooster","offers":[{"title":"Default Title","offer_id":53697160544549,"sku":"HC2-9.0-B-1","price":1320.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0252\/8375\/6086\/files\/HC2-1_f25a8315-f6df-4d22-ba75-bb20ad84f082.png?v=1787964489"},{"product_id":"hc2-9-0-b-2-minibooster-pressure-intensifier-9-0-ratio-7-16-20-unf-inlet-port-9-16-18-unf-outlet-port-3-4gpm-and-3000psi-inlet-0-2gpm-and-11600psi-outlet-with-dump-valve","title":"HC2-9.0-B-2 miniBooster Pressure Intensifier, 9.0 Ratio, 7\/16-20 UNF Inlet Port, 9\/16-18 UNF Outlet Port, 3.4GPM and 3000psi Inlet, 0.2GPM and 11600psi Outlet, With Dump Valve","description":"\u003cp\u003eThe miniBOOSTER HC2 Hydraulic Intensifier is a compact, inline pressure booster designed to generate and maintain high hydraulic pressure using an existing low-pressure supply. Weighing only 2.2 lb (1.0 kg), the HC2 automatically increases outlet pressure and compensates for minor oil consumption or leakage to maintain the required pressure. It is available with 15 intensification ratios from 1.2:1 to 25:1, inlet pressures from 20 to 207 bar (290 to 3,000 psi), and maximum outlet pressure up to 800 bar (11,600 psi). Outlet pressure is controlled by varying the supplied inlet pressure. Available configurations include the HC2-A without a dump valve, HC2-B with an integrated dump valve, and HC2-G with proportional pressure control, with BSPP or UNF port options. Typical applications include hydraulic workholding, clamping systems, machine tools, industrial automation, testing equipment, and compact machinery requiring high pressure from a conventional hydraulic power source.\u003c\/p\u003e\n\n\u003cp\u003eWarning: Hydraulic intensifiers can generate extremely high pressure. Select the correct intensification ratio and verify that all hoses, fittings, valves, gauges, actuators, and other downstream components are rated for the maximum possible outlet pressure. Never exceed the HC2’s specified inlet pressure, outlet pressure, or flow limits, and keep return-line pressure as low as possible because backpressure affects available outlet pressure. Installation, adjustment, and service should be performed only by qualified hydraulic personnel with the system completely depressurized. Confirm fluid compatibility, port configuration, tightening torque, circuit design, and model-specific requirements using the manufacturer’s documentation before operation. Specifications and available configurations vary by model.\u003c\/p\u003e","brand":"miniBooster","offers":[{"title":"Default Title","offer_id":53697160577317,"sku":"HC2-9.0-B-2","price":1320.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0252\/8375\/6086\/files\/HC2-1_0fa503a8-c9f3-4fc2-b109-0717991287be.png?v=1787964491"},{"product_id":"hc2-13-0-b-1-minibooster-pressure-intensifier-13-0-ratio-1-4-bspp-inlet-port-1-4-bspp-outlet-port-3-2gpm-and-3000psi-inlet-0-2gpm-and-11600psi-outlet-with-dump-valve","title":"HC2-13.0-B-1 miniBooster Pressure Intensifier, 13.0 Ratio, 1\/4\" BSPP Inlet Port, 1\/4\" BSPP Outlet Port, 3.2GPM and 3000psi Inlet, 0.2GPM and 11600psi Outlet, With Dump Valve","description":"\u003cp\u003eThe miniBOOSTER HC2 Hydraulic Intensifier is a compact, inline pressure booster designed to generate and maintain high hydraulic pressure using an existing low-pressure supply. Weighing only 2.2 lb (1.0 kg), the HC2 automatically increases outlet pressure and compensates for minor oil consumption or leakage to maintain the required pressure. It is available with 15 intensification ratios from 1.2:1 to 25:1, inlet pressures from 20 to 207 bar (290 to 3,000 psi), and maximum outlet pressure up to 800 bar (11,600 psi). Outlet pressure is controlled by varying the supplied inlet pressure. Available configurations include the HC2-A without a dump valve, HC2-B with an integrated dump valve, and HC2-G with proportional pressure control, with BSPP or UNF port options. Typical applications include hydraulic workholding, clamping systems, machine tools, industrial automation, testing equipment, and compact machinery requiring high pressure from a conventional hydraulic power source.\u003c\/p\u003e\n\n\u003cp\u003eWarning: Hydraulic intensifiers can generate extremely high pressure. Select the correct intensification ratio and verify that all hoses, fittings, valves, gauges, actuators, and other downstream components are rated for the maximum possible outlet pressure. Never exceed the HC2’s specified inlet pressure, outlet pressure, or flow limits, and keep return-line pressure as low as possible because backpressure affects available outlet pressure. Installation, adjustment, and service should be performed only by qualified hydraulic personnel with the system completely depressurized. Confirm fluid compatibility, port configuration, tightening torque, circuit design, and model-specific requirements using the manufacturer’s documentation before operation. Specifications and available configurations vary by model.\u003c\/p\u003e","brand":"miniBooster","offers":[{"title":"Default Title","offer_id":53697161003301,"sku":"HC2-13.0-B-1","price":1320.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0252\/8375\/6086\/files\/HC2-1_beec9a35-8c06-4e7d-9ad8-cee13ae44ae6.png?v=1787964504"},{"product_id":"hc2-13-0-b-2-minibooster-pressure-intensifier-13-0-ratio-7-16-20-unf-inlet-port-9-16-18-unf-outlet-port-3-2gpm-and-3000psi-inlet-0-2gpm-and-11600psi-outlet-with-dump-valve","title":"HC2-13.0-B-2 miniBooster Pressure Intensifier, 13.0 Ratio, 7\/16-20 UNF Inlet Port, 9\/16-18 UNF Outlet Port, 3.2GPM and 3000psi Inlet, 0.2GPM and 11600psi Outlet, With Dump Valve","description":"\u003cp\u003eThe miniBOOSTER HC2 Hydraulic Intensifier is a compact, inline pressure booster designed to generate and maintain high hydraulic pressure using an existing low-pressure supply. Weighing only 2.2 lb (1.0 kg), the HC2 automatically increases outlet pressure and compensates for minor oil consumption or leakage to maintain the required pressure. It is available with 15 intensification ratios from 1.2:1 to 25:1, inlet pressures from 20 to 207 bar (290 to 3,000 psi), and maximum outlet pressure up to 800 bar (11,600 psi). Outlet pressure is controlled by varying the supplied inlet pressure. Available configurations include the HC2-A without a dump valve, HC2-B with an integrated dump valve, and HC2-G with proportional pressure control, with BSPP or UNF port options. Typical applications include hydraulic workholding, clamping systems, machine tools, industrial automation, testing equipment, and compact machinery requiring high pressure from a conventional hydraulic power source.\u003c\/p\u003e\n\n\u003cp\u003eWarning: Hydraulic intensifiers can generate extremely high pressure. Select the correct intensification ratio and verify that all hoses, fittings, valves, gauges, actuators, and other downstream components are rated for the maximum possible outlet pressure. Never exceed the HC2’s specified inlet pressure, outlet pressure, or flow limits, and keep return-line pressure as low as possible because backpressure affects available outlet pressure. Installation, adjustment, and service should be performed only by qualified hydraulic personnel with the system completely depressurized. Confirm fluid compatibility, port configuration, tightening torque, circuit design, and model-specific requirements using the manufacturer’s documentation before operation. Specifications and available configurations vary by model.\u003c\/p\u003e","brand":"miniBooster","offers":[{"title":"Default Title","offer_id":53697161036069,"sku":"HC2-13.0-B-2","price":1320.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0252\/8375\/6086\/files\/HC2-1_347c4a7d-7c8a-4470-a59f-c544c5f512c1.png?v=1787964505"},{"product_id":"hc2-20-0-b-1-minibooster-pressure-intensifier-20-0-ratio-1-4-bspp-inlet-port-1-4-bspp-outlet-port-3-2gpm-and-3000psi-inlet-0-1gpm-and-11600psi-outlet-with-dump-valve","title":"HC2-20.0-B-1 miniBooster Pressure Intensifier, 20.0 Ratio, 1\/4\" BSPP Inlet Port, 1\/4\" BSPP Outlet Port, 3.2GPM and 3000psi Inlet, 0.1GPM and 11600psi Outlet, With Dump Valve","description":"\u003cp\u003eThe miniBOOSTER HC2 Hydraulic Intensifier is a compact, inline pressure booster designed to generate and maintain high hydraulic pressure using an existing low-pressure supply. Weighing only 2.2 lb (1.0 kg), the HC2 automatically increases outlet pressure and compensates for minor oil consumption or leakage to maintain the required pressure. It is available with 15 intensification ratios from 1.2:1 to 25:1, inlet pressures from 20 to 207 bar (290 to 3,000 psi), and maximum outlet pressure up to 800 bar (11,600 psi). Outlet pressure is controlled by varying the supplied inlet pressure. Available configurations include the HC2-A without a dump valve, HC2-B with an integrated dump valve, and HC2-G with proportional pressure control, with BSPP or UNF port options. Typical applications include hydraulic workholding, clamping systems, machine tools, industrial automation, testing equipment, and compact machinery requiring high pressure from a conventional hydraulic power source.\u003c\/p\u003e\n\n\u003cp\u003eWarning: Hydraulic intensifiers can generate extremely high pressure. Select the correct intensification ratio and verify that all hoses, fittings, valves, gauges, actuators, and other downstream components are rated for the maximum possible outlet pressure. Never exceed the HC2’s specified inlet pressure, outlet pressure, or flow limits, and keep return-line pressure as low as possible because backpressure affects available outlet pressure. Installation, adjustment, and service should be performed only by qualified hydraulic personnel with the system completely depressurized. Confirm fluid compatibility, port configuration, tightening torque, circuit design, and model-specific requirements using the manufacturer’s documentation before operation. Specifications and available configurations vary by model.\u003c\/p\u003e","brand":"miniBooster","offers":[{"title":"Default Title","offer_id":53697161396517,"sku":"HC2-20.0-B-1","price":1320.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0252\/8375\/6086\/files\/HC2-1_ad367b34-720e-42ab-b73e-26fc7b54c12d.png?v=1787964513"},{"product_id":"hc2-20-0-b-2-minibooster-pressure-intensifier-20-0-ratio-7-16-20-unf-inlet-port-9-16-18-unf-outlet-port-3-2gpm-and-3000psi-inlet-0-1gpm-and-11600psi-outlet-with-dump-valve","title":"HC2-20.0-B-2 miniBooster Pressure Intensifier, 20.0 Ratio, 7\/16-20 UNF Inlet Port, 9\/16-18 UNF Outlet Port, 3.2GPM and 3000psi Inlet, 0.1GPM and 11600psi Outlet, With Dump Valve","description":"\u003cp\u003eThe miniBOOSTER HC2 Hydraulic Intensifier is a compact, inline pressure booster designed to generate and maintain high hydraulic pressure using an existing low-pressure supply. Weighing only 2.2 lb (1.0 kg), the HC2 automatically increases outlet pressure and compensates for minor oil consumption or leakage to maintain the required pressure. It is available with 15 intensification ratios from 1.2:1 to 25:1, inlet pressures from 20 to 207 bar (290 to 3,000 psi), and maximum outlet pressure up to 800 bar (11,600 psi). Outlet pressure is controlled by varying the supplied inlet pressure. Available configurations include the HC2-A without a dump valve, HC2-B with an integrated dump valve, and HC2-G with proportional pressure control, with BSPP or UNF port options. Typical applications include hydraulic workholding, clamping systems, machine tools, industrial automation, testing equipment, and compact machinery requiring high pressure from a conventional hydraulic power source.\u003c\/p\u003e\n\n\u003cp\u003eWarning: Hydraulic intensifiers can generate extremely high pressure. Select the correct intensification ratio and verify that all hoses, fittings, valves, gauges, actuators, and other downstream components are rated for the maximum possible outlet pressure. Never exceed the HC2’s specified inlet pressure, outlet pressure, or flow limits, and keep return-line pressure as low as possible because backpressure affects available outlet pressure. Installation, adjustment, and service should be performed only by qualified hydraulic personnel with the system completely depressurized. Confirm fluid compatibility, port configuration, tightening torque, circuit design, and model-specific requirements using the manufacturer’s documentation before operation. Specifications and available configurations vary by model.\u003c\/p\u003e","brand":"miniBooster","offers":[{"title":"Default Title","offer_id":53697161429285,"sku":"HC2-20.0-B-2","price":1320.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0252\/8375\/6086\/files\/HC2-1_0957fb0a-dcbb-484c-83da-4590169de40e.png?v=1787964515"},{"product_id":"hc2-25-0-b-1-minibooster-pressure-intensifier-25-0-ratio-1-4-bspp-inlet-port-1-4-bspp-outlet-port-3-2gpm-and-3000psi-inlet-0-1gpm-and-11600psi-outlet-with-dump-valve","title":"HC2-25.0-B-1 miniBooster Pressure Intensifier, 25.0 Ratio, 1\/4\" BSPP Inlet Port, 1\/4\" BSPP Outlet Port, 3.2GPM and 3000psi Inlet, 0.1GPM and 11600psi Outlet, With Dump Valve","description":"\u003cp\u003eThe miniBOOSTER HC2 Hydraulic Intensifier is a compact, inline pressure booster designed to generate and maintain high hydraulic pressure using an existing low-pressure supply. Weighing only 2.2 lb (1.0 kg), the HC2 automatically increases outlet pressure and compensates for minor oil consumption or leakage to maintain the required pressure. It is available with 15 intensification ratios from 1.2:1 to 25:1, inlet pressures from 20 to 207 bar (290 to 3,000 psi), and maximum outlet pressure up to 800 bar (11,600 psi). Outlet pressure is controlled by varying the supplied inlet pressure. Available configurations include the HC2-A without a dump valve, HC2-B with an integrated dump valve, and HC2-G with proportional pressure control, with BSPP or UNF port options. Typical applications include hydraulic workholding, clamping systems, machine tools, industrial automation, testing equipment, and compact machinery requiring high pressure from a conventional hydraulic power source.\u003c\/p\u003e\n\n\u003cp\u003eWarning: Hydraulic intensifiers can generate extremely high pressure. Select the correct intensification ratio and verify that all hoses, fittings, valves, gauges, actuators, and other downstream components are rated for the maximum possible outlet pressure. Never exceed the HC2’s specified inlet pressure, outlet pressure, or flow limits, and keep return-line pressure as low as possible because backpressure affects available outlet pressure. Installation, adjustment, and service should be performed only by qualified hydraulic personnel with the system completely depressurized. Confirm fluid compatibility, port configuration, tightening torque, circuit design, and model-specific requirements using the manufacturer’s documentation before operation. Specifications and available configurations vary by model.\u003c\/p\u003e","brand":"miniBooster","offers":[{"title":"Default Title","offer_id":53697161494821,"sku":"HC2-25.0-B-1","price":1320.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0252\/8375\/6086\/files\/HC2-1_b50b1606-2df3-42ec-9a7a-06178f4dd856.png?v=1787964521"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0252\/8375\/6086\/collections\/HC2-1_54c1d9c4-02fd-444c-8fb2-62a222301f4b.png?v=1787966441","url":"https:\/\/www.onehydraulics.com\/collections\/shop-minibooster-hc2-b-hydraulic-intensifiers-with-dump-valve.oembed","provider":"OneHydraulics","version":"1.0","type":"link"}