{"title":"Shop 2706 Straight Bulkhead Male NPT - Male JIC","description":"\u003cp class=\"gf_gs-text-heading-2\"\u003eThe Series 2706 Straight Bulkhead Male NPT x Male JIC hydraulic adapters, made from durable carbon steel, are designed to provide reliable and secure connections in hydraulic systems. These adapters feature a male NPT (National Pipe Taper) end, which utilizes tapered threads to effectively seal pipes for fluid and gas transfer through a metal-to-metal connection that relies on thread deformation. The nominal pipe size can be determined by measuring the thread diameter and subtracting 1\/4\". On the other end, the male JIC (Joint Industry Council) fitting, defined by SAE J514, incorporates a 37-degree flare seating surface and parallel threads, commonly used in fluid power systems. The seal is achieved by contact between the male flared seat and the female coned seat, creating a strong mechanical connection. While NPT connections are ideal for single assembly applications, they are not recommended for frequent disassembly due to potential wear on the threads. The Series 2706 adapters are perfect for professionals seeking dependable and efficient hydraulic solutions in a variety of applications, ensuring optimal performance and safety in fluid transfer.\u003c\/p\u003e\n\u003cp class=\"gf_gs-text-heading-2\"\u003e\u003ci\u003eItems in this collection are equivalent or similar to Series Aeroquip 2240, Dayco 2706-[R], Flodar AC1009-[R], Lenz 3995-[R], SSP JBC.\u003c\/i\u003e\u003c\/p\u003e","products":[{"product_id":"294421","title":"2706-02-04 : OneHydraulics Straight Steel Bulkhead Adapter, 1\/8-27 (-02) Male NPT x 7\/16-20 (-04) Male JIC, 6000psi","description":"\u003cp\u003eThe Brennan Industries steel and stainless steel 37-degree flare tube fittings meet all design and performance requirements for 37-degree flare tube fittings in Standard J514 published by the Society of Automotive Engineers (SAE). This design was originally founded as a JIC (Joint Industrial) design, and was later adoped by the SAE to assure dimensional interchangeability between various manufacturers worldwide. Brennan also offers a wide variety of pipe fittings and adapters, including straight thread adapters, male and female pipe fittings, male to female pipe adapters, and straight thread to pipe adapters. Brennan Industries hydraulic tube fitting and adapter part numbers are constructed from symbols that identify the series, size, material and type of product. When ordering part numbers, begin by listing the series followed by the size and the material suffix. Sizes are measured in sixteenths of an inch (example: 4\/16 or 4). The standard product is produced in steel and requires no material suffix. If ordering stainless steel products, add the suffix SS, and if you are ordering brass products, add the suffix B. Metric Bite Type Fittings are called out by tube size (in millimeters) i.e. 20mm Tube (S20), while Metric Port Fittings are called out by Thread O.D. and Thread Pitch (in millimeters) i.e. 30x2.0 or 30x1.5. BSPP fittings, while different from U.S. threads are still measured fractionally and are therefore called out by sixteenths of an inch.\u003c\/p\u003e","brand":"OneHydraulics","offers":[{"title":"Default Title","offer_id":31412525924406,"sku":"2706-02-04","price":3.64,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0252\/8375\/6086\/files\/2706.png?v=1731021734"},{"product_id":"2706-16-16","title":"2706-16-16 : OneHydraulics Straight Steel Bulkhead Adapter, 1-11-1\/2 (-16) Male NPT x 1-5\/16-12 (-16) Male JIC, 4000psi","description":"\u003cp\u003eThe Brennan Industries steel and stainless steel 37-degree flare tube fittings meet all design and performance requirements for 37-degree flare tube fittings in Standard J514 published by the Society of Automotive Engineers (SAE). This design was originally founded as a JIC (Joint Industrial) design, and was later adoped by the SAE to assure dimensional interchangeability between various manufacturers worldwide. Brennan also offers a wide variety of pipe fittings and adapters, including straight thread adapters, male and female pipe fittings, male to female pipe adapters, and straight thread to pipe adapters. Brennan Industries hydraulic tube fitting and adapter part numbers are constructed from symbols that identify the series, size, material and type of product. When ordering part numbers, begin by listing the series followed by the size and the material suffix. Sizes are measured in sixteenths of an inch (example: 4\/16 or 4). The standard product is produced in steel and requires no material suffix. If ordering stainless steel products, add the suffix SS, and if you are ordering brass products, add the suffix B. Metric Bite Type Fittings are called out by tube size (in millimeters) i.e. 20mm Tube (S20), while Metric Port Fittings are called out by Thread O.D. and Thread Pitch (in millimeters) i.e. 30x2.0 or 30x1.5. BSPP fittings, while different from U.S. threads are still measured fractionally and are therefore called out by sixteenths of an inch.\u003c\/p\u003e","brand":"OneHydraulics","offers":[{"title":"Default Title","offer_id":31412526350390,"sku":"2706-16-16","price":9.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0252\/8375\/6086\/files\/2706.png?v=1731021734"},{"product_id":"2706-20-20","title":"2706-20-20 : OneHydraulics Straight Steel Bulkhead Adapter, 1-1\/4-11-1\/2 (-20) Male NPT x 1-5\/8-12 (-20) Male JIC, 3000psi","description":"\u003cp\u003eThe Brennan Industries steel and stainless steel 37-degree flare tube fittings meet all design and performance requirements for 37-degree flare tube fittings in Standard J514 published by the Society of Automotive Engineers (SAE). This design was originally founded as a JIC (Joint Industrial) design, and was later adoped by the SAE to assure dimensional interchangeability between various manufacturers worldwide. Brennan also offers a wide variety of pipe fittings and adapters, including straight thread adapters, male and female pipe fittings, male to female pipe adapters, and straight thread to pipe adapters. Brennan Industries hydraulic tube fitting and adapter part numbers are constructed from symbols that identify the series, size, material and type of product. When ordering part numbers, begin by listing the series followed by the size and the material suffix. Sizes are measured in sixteenths of an inch (example: 4\/16 or 4). The standard product is produced in steel and requires no material suffix. If ordering stainless steel products, add the suffix SS, and if you are ordering brass products, add the suffix B. Metric Bite Type Fittings are called out by tube size (in millimeters) i.e. 20mm Tube (S20), while Metric Port Fittings are called out by Thread O.D. and Thread Pitch (in millimeters) i.e. 30x2.0 or 30x1.5. BSPP fittings, while different from U.S. threads are still measured fractionally and are therefore called out by sixteenths of an inch.\u003c\/p\u003e","brand":"OneHydraulics","offers":[{"title":"Default Title","offer_id":31412526415926,"sku":"2706-20-20","price":23.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0252\/8375\/6086\/files\/2706.png?v=1731021734"},{"product_id":"2706-24-24","title":"2706-24-24 : OneHydraulics Straight Steel Bulkhead Adapter, 1-1\/2-11-1\/2 (-24) Male NPT x 1-7\/8-12 (-24) Male JIC, 3000psi","description":"\u003cp\u003eThe Brennan Industries steel and stainless steel 37-degree flare tube fittings meet all design and performance requirements for 37-degree flare tube fittings in Standard J514 published by the Society of Automotive Engineers (SAE). This design was originally founded as a JIC (Joint Industrial) design, and was later adoped by the SAE to assure dimensional interchangeability between various manufacturers worldwide. Brennan also offers a wide variety of pipe fittings and adapters, including straight thread adapters, male and female pipe fittings, male to female pipe adapters, and straight thread to pipe adapters. Brennan Industries hydraulic tube fitting and adapter part numbers are constructed from symbols that identify the series, size, material and type of product. When ordering part numbers, begin by listing the series followed by the size and the material suffix. Sizes are measured in sixteenths of an inch (example: 4\/16 or 4). The standard product is produced in steel and requires no material suffix. If ordering stainless steel products, add the suffix SS, and if you are ordering brass products, add the suffix B. Metric Bite Type Fittings are called out by tube size (in millimeters) i.e. 20mm Tube (S20), while Metric Port Fittings are called out by Thread O.D. and Thread Pitch (in millimeters) i.e. 30x2.0 or 30x1.5. BSPP fittings, while different from U.S. threads are still measured fractionally and are therefore called out by sixteenths of an inch.\u003c\/p\u003e","brand":"OneHydraulics","offers":[{"title":"Default Title","offer_id":31412526514230,"sku":"2706-24-24","price":24.53,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0252\/8375\/6086\/files\/2706.png?v=1731021734"},{"product_id":"2706-32-32","title":"2706-32-32 : OneHydraulics Straight Steel Bulkhead Adapter, 2-11-1\/2 (-32) Male NPT x 2-1\/2-12 (-32) Male JIC, 2000psi","description":"\u003cp\u003eThe Brennan Industries steel and stainless steel 37-degree flare tube fittings meet all design and performance requirements for 37-degree flare tube fittings in Standard J514 published by the Society of Automotive Engineers (SAE). This design was originally founded as a JIC (Joint Industrial) design, and was later adoped by the SAE to assure dimensional interchangeability between various manufacturers worldwide. Brennan also offers a wide variety of pipe fittings and adapters, including straight thread adapters, male and female pipe fittings, male to female pipe adapters, and straight thread to pipe adapters. Brennan Industries hydraulic tube fitting and adapter part numbers are constructed from symbols that identify the series, size, material and type of product. When ordering part numbers, begin by listing the series followed by the size and the material suffix. Sizes are measured in sixteenths of an inch (example: 4\/16 or 4). The standard product is produced in steel and requires no material suffix. If ordering stainless steel products, add the suffix SS, and if you are ordering brass products, add the suffix B. Metric Bite Type Fittings are called out by tube size (in millimeters) i.e. 20mm Tube (S20), while Metric Port Fittings are called out by Thread O.D. and Thread Pitch (in millimeters) i.e. 30x2.0 or 30x1.5. BSPP fittings, while different from U.S. threads are still measured fractionally and are therefore called out by sixteenths of an inch.\u003c\/p\u003e","brand":"OneHydraulics","offers":[{"title":"Default Title","offer_id":31412526579766,"sku":"2706-32-32","price":75.93,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0252\/8375\/6086\/files\/2706.png?v=1731021734"},{"product_id":"294478","title":"2706-04-02 : OneHydraulics Straight Steel Bulkhead Adapter, 1\/4-18 (-04) Male NPT x 5\/16-24 (-02) Male JIC, 6000psi","description":"\u003cp\u003eThe Brennan Industries steel and stainless steel 37-degree flare tube fittings meet all design and performance requirements for 37-degree flare tube fittings in Standard J514 published by the Society of Automotive Engineers (SAE). This design was originally founded as a JIC (Joint Industrial) design, and was later adoped by the SAE to assure dimensional interchangeability between various manufacturers worldwide. Brennan also offers a wide variety of pipe fittings and adapters, including straight thread adapters, male and female pipe fittings, male to female pipe adapters, and straight thread to pipe adapters. Brennan Industries hydraulic tube fitting and adapter part numbers are constructed from symbols that identify the series, size, material and type of product. When ordering part numbers, begin by listing the series followed by the size and the material suffix. Sizes are measured in sixteenths of an inch (example: 4\/16 or 4). The standard product is produced in steel and requires no material suffix. If ordering stainless steel products, add the suffix SS, and if you are ordering brass products, add the suffix B. Metric Bite Type Fittings are called out by tube size (in millimeters) i.e. 20mm Tube (S20), while Metric Port Fittings are called out by Thread O.D. and Thread Pitch (in millimeters) i.e. 30x2.0 or 30x1.5. BSPP fittings, while different from U.S. threads are still measured fractionally and are therefore called out by sixteenths of an inch.\u003c\/p\u003e","brand":"OneHydraulics","offers":[{"title":"Default Title","offer_id":31417135497270,"sku":"2706-04-02","price":4.01,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0252\/8375\/6086\/files\/2706.png?v=1731021734"},{"product_id":"294480","title":"2706-04-04 : OneHydraulics Straight Steel Bulkhead Adapter, 1\/4-18 (-04) Male NPT x 7\/16-20 (-04) Male JIC, 6000psi","description":"\u003cp\u003eThe Brennan Industries steel and stainless steel 37-degree flare tube fittings meet all design and performance requirements for 37-degree flare tube fittings in Standard J514 published by the Society of Automotive Engineers (SAE). This design was originally founded as a JIC (Joint Industrial) design, and was later adoped by the SAE to assure dimensional interchangeability between various manufacturers worldwide. Brennan also offers a wide variety of pipe fittings and adapters, including straight thread adapters, male and female pipe fittings, male to female pipe adapters, and straight thread to pipe adapters. Brennan Industries hydraulic tube fitting and adapter part numbers are constructed from symbols that identify the series, size, material and type of product. When ordering part numbers, begin by listing the series followed by the size and the material suffix. Sizes are measured in sixteenths of an inch (example: 4\/16 or 4). The standard product is produced in steel and requires no material suffix. If ordering stainless steel products, add the suffix SS, and if you are ordering brass products, add the suffix B. Metric Bite Type Fittings are called out by tube size (in millimeters) i.e. 20mm Tube (S20), while Metric Port Fittings are called out by Thread O.D. and Thread Pitch (in millimeters) i.e. 30x2.0 or 30x1.5. BSPP fittings, while different from U.S. threads are still measured fractionally and are therefore called out by sixteenths of an inch.\u003c\/p\u003e","brand":"OneHydraulics","offers":[{"title":"Default Title","offer_id":31417135726646,"sku":"2706-04-04","price":3.16,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0252\/8375\/6086\/files\/2706.png?v=1731021734"},{"product_id":"294482","title":"2706-04-06 : OneHydraulics Straight Steel Bulkhead Adapter, 1\/4-18 (-04) Male NPT x 9\/16-18 (-06) Male JIC, 6000psi","description":"\u003cp\u003eThe Brennan Industries steel and stainless steel 37-degree flare tube fittings meet all design and performance requirements for 37-degree flare tube fittings in Standard J514 published by the Society of Automotive Engineers (SAE). This design was originally founded as a JIC (Joint Industrial) design, and was later adoped by the SAE to assure dimensional interchangeability between various manufacturers worldwide. Brennan also offers a wide variety of pipe fittings and adapters, including straight thread adapters, male and female pipe fittings, male to female pipe adapters, and straight thread to pipe adapters. Brennan Industries hydraulic tube fitting and adapter part numbers are constructed from symbols that identify the series, size, material and type of product. When ordering part numbers, begin by listing the series followed by the size and the material suffix. Sizes are measured in sixteenths of an inch (example: 4\/16 or 4). The standard product is produced in steel and requires no material suffix. If ordering stainless steel products, add the suffix SS, and if you are ordering brass products, add the suffix B. Metric Bite Type Fittings are called out by tube size (in millimeters) i.e. 20mm Tube (S20), while Metric Port Fittings are called out by Thread O.D. and Thread Pitch (in millimeters) i.e. 30x2.0 or 30x1.5. BSPP fittings, while different from U.S. threads are still measured fractionally and are therefore called out by sixteenths of an inch.\u003c\/p\u003e","brand":"OneHydraulics","offers":[{"title":"Default Title","offer_id":31417135759414,"sku":"2706-04-06","price":4.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0252\/8375\/6086\/files\/2706.png?v=1731021734"},{"product_id":"294543","title":"2706-06-06 : OneHydraulics Straight Steel Bulkhead Adapter, 3\/8-18 (-06) Male NPT x 9\/16-18 (-06) Male JIC, 6000psi","description":"\u003cp\u003eThe Brennan Industries steel and stainless steel 37-degree flare tube fittings meet all design and performance requirements for 37-degree flare tube fittings in Standard J514 published by the Society of Automotive Engineers (SAE). This design was originally founded as a JIC (Joint Industrial) design, and was later adoped by the SAE to assure dimensional interchangeability between various manufacturers worldwide. Brennan also offers a wide variety of pipe fittings and adapters, including straight thread adapters, male and female pipe fittings, male to female pipe adapters, and straight thread to pipe adapters. Brennan Industries hydraulic tube fitting and adapter part numbers are constructed from symbols that identify the series, size, material and type of product. When ordering part numbers, begin by listing the series followed by the size and the material suffix. Sizes are measured in sixteenths of an inch (example: 4\/16 or 4). The standard product is produced in steel and requires no material suffix. If ordering stainless steel products, add the suffix SS, and if you are ordering brass products, add the suffix B. Metric Bite Type Fittings are called out by tube size (in millimeters) i.e. 20mm Tube (S20), while Metric Port Fittings are called out by Thread O.D. and Thread Pitch (in millimeters) i.e. 30x2.0 or 30x1.5. BSPP fittings, while different from U.S. threads are still measured fractionally and are therefore called out by sixteenths of an inch.\u003c\/p\u003e","brand":"OneHydraulics","offers":[{"title":"Default Title","offer_id":31417135792182,"sku":"2706-06-06","price":4.42,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0252\/8375\/6086\/files\/2706.png?v=1731021734"},{"product_id":"294545","title":"2706-06-08 : OneHydraulics Straight Steel Bulkhead Adapter, 3\/8-18 (-06) Male NPT x 3\/4-16 (-08) Male JIC, 6000psi","description":"\u003cp\u003eThe Brennan Industries steel and stainless steel 37-degree flare tube fittings meet all design and performance requirements for 37-degree flare tube fittings in Standard J514 published by the Society of Automotive Engineers (SAE). This design was originally founded as a JIC (Joint Industrial) design, and was later adoped by the SAE to assure dimensional interchangeability between various manufacturers worldwide. Brennan also offers a wide variety of pipe fittings and adapters, including straight thread adapters, male and female pipe fittings, male to female pipe adapters, and straight thread to pipe adapters. Brennan Industries hydraulic tube fitting and adapter part numbers are constructed from symbols that identify the series, size, material and type of product. When ordering part numbers, begin by listing the series followed by the size and the material suffix. Sizes are measured in sixteenths of an inch (example: 4\/16 or 4). The standard product is produced in steel and requires no material suffix. If ordering stainless steel products, add the suffix SS, and if you are ordering brass products, add the suffix B. Metric Bite Type Fittings are called out by tube size (in millimeters) i.e. 20mm Tube (S20), while Metric Port Fittings are called out by Thread O.D. and Thread Pitch (in millimeters) i.e. 30x2.0 or 30x1.5. BSPP fittings, while different from U.S. threads are still measured fractionally and are therefore called out by sixteenths of an inch.\u003c\/p\u003e","brand":"OneHydraulics","offers":[{"title":"Default Title","offer_id":31417135988790,"sku":"2706-06-08","price":6.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0252\/8375\/6086\/files\/2706.png?v=1731021734"},{"product_id":"294604","title":"2706-08-06 : OneHydraulics Straight Steel Bulkhead Adapter, 1\/2-14 (-08) Male NPT x 9\/16-18 (-06) Male JIC, 6000psi","description":"\u003cp\u003eThe Brennan Industries steel and stainless steel 37-degree flare tube fittings meet all design and performance requirements for 37-degree flare tube fittings in Standard J514 published by the Society of Automotive Engineers (SAE). This design was originally founded as a JIC (Joint Industrial) design, and was later adoped by the SAE to assure dimensional interchangeability between various manufacturers worldwide. Brennan also offers a wide variety of pipe fittings and adapters, including straight thread adapters, male and female pipe fittings, male to female pipe adapters, and straight thread to pipe adapters. Brennan Industries hydraulic tube fitting and adapter part numbers are constructed from symbols that identify the series, size, material and type of product. When ordering part numbers, begin by listing the series followed by the size and the material suffix. Sizes are measured in sixteenths of an inch (example: 4\/16 or 4). The standard product is produced in steel and requires no material suffix. If ordering stainless steel products, add the suffix SS, and if you are ordering brass products, add the suffix B. Metric Bite Type Fittings are called out by tube size (in millimeters) i.e. 20mm Tube (S20), while Metric Port Fittings are called out by Thread O.D. and Thread Pitch (in millimeters) i.e. 30x2.0 or 30x1.5. BSPP fittings, while different from U.S. threads are still measured fractionally and are therefore called out by sixteenths of an inch.\u003c\/p\u003e","brand":"OneHydraulics","offers":[{"title":"Default Title","offer_id":31417136021558,"sku":"2706-08-06","price":6.01,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0252\/8375\/6086\/files\/2706.png?v=1731021734"},{"product_id":"294606","title":"2706-08-08 : OneHydraulics Straight Steel Bulkhead Adapter, 1\/2-14 (-08) Male NPT x 3\/4-16 (-08) Male JIC, 6000psi","description":"\u003cp\u003eThe Brennan Industries steel and stainless steel 37-degree flare tube fittings meet all design and performance requirements for 37-degree flare tube fittings in Standard J514 published by the Society of Automotive Engineers (SAE). This design was originally founded as a JIC (Joint Industrial) design, and was later adoped by the SAE to assure dimensional interchangeability between various manufacturers worldwide. Brennan also offers a wide variety of pipe fittings and adapters, including straight thread adapters, male and female pipe fittings, male to female pipe adapters, and straight thread to pipe adapters. Brennan Industries hydraulic tube fitting and adapter part numbers are constructed from symbols that identify the series, size, material and type of product. When ordering part numbers, begin by listing the series followed by the size and the material suffix. Sizes are measured in sixteenths of an inch (example: 4\/16 or 4). The standard product is produced in steel and requires no material suffix. If ordering stainless steel products, add the suffix SS, and if you are ordering brass products, add the suffix B. Metric Bite Type Fittings are called out by tube size (in millimeters) i.e. 20mm Tube (S20), while Metric Port Fittings are called out by Thread O.D. and Thread Pitch (in millimeters) i.e. 30x2.0 or 30x1.5. BSPP fittings, while different from U.S. threads are still measured fractionally and are therefore called out by sixteenths of an inch.\u003c\/p\u003e","brand":"OneHydraulics","offers":[{"title":"Default Title","offer_id":31417136054326,"sku":"2706-08-08","price":5.53,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0252\/8375\/6086\/files\/2706.png?v=1731021734"},{"product_id":"294608","title":"2706-08-10 : OneHydraulics Straight Steel Bulkhead Adapter, 1\/2-14 (-08) Male NPT x 7\/8-14 (-10) Male JIC, 5000psi","description":"\u003cp\u003eThe Brennan Industries steel and stainless steel 37-degree flare tube fittings meet all design and performance requirements for 37-degree flare tube fittings in Standard J514 published by the Society of Automotive Engineers (SAE). This design was originally founded as a JIC (Joint Industrial) design, and was later adoped by the SAE to assure dimensional interchangeability between various manufacturers worldwide. Brennan also offers a wide variety of pipe fittings and adapters, including straight thread adapters, male and female pipe fittings, male to female pipe adapters, and straight thread to pipe adapters. Brennan Industries hydraulic tube fitting and adapter part numbers are constructed from symbols that identify the series, size, material and type of product. When ordering part numbers, begin by listing the series followed by the size and the material suffix. Sizes are measured in sixteenths of an inch (example: 4\/16 or 4). The standard product is produced in steel and requires no material suffix. If ordering stainless steel products, add the suffix SS, and if you are ordering brass products, add the suffix B. Metric Bite Type Fittings are called out by tube size (in millimeters) i.e. 20mm Tube (S20), while Metric Port Fittings are called out by Thread O.D. and Thread Pitch (in millimeters) i.e. 30x2.0 or 30x1.5. BSPP fittings, while different from U.S. threads are still measured fractionally and are therefore called out by sixteenths of an inch.\u003c\/p\u003e","brand":"OneHydraulics","offers":[{"title":"Default Title","offer_id":31417136087094,"sku":"2706-08-10","price":7.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0252\/8375\/6086\/files\/2706.png?v=1731021734"},{"product_id":"294610","title":"2706-08-12 : OneHydraulics Straight Steel Bulkhead Adapter, 1\/2-14 (-08) Male NPT x 1-1\/16-12 (-12) Male JIC, 5000psi","description":"\u003cp\u003eThe Brennan Industries steel and stainless steel 37-degree flare tube fittings meet all design and performance requirements for 37-degree flare tube fittings in Standard J514 published by the Society of Automotive Engineers (SAE). This design was originally founded as a JIC (Joint Industrial) design, and was later adoped by the SAE to assure dimensional interchangeability between various manufacturers worldwide. Brennan also offers a wide variety of pipe fittings and adapters, including straight thread adapters, male and female pipe fittings, male to female pipe adapters, and straight thread to pipe adapters. Brennan Industries hydraulic tube fitting and adapter part numbers are constructed from symbols that identify the series, size, material and type of product. When ordering part numbers, begin by listing the series followed by the size and the material suffix. Sizes are measured in sixteenths of an inch (example: 4\/16 or 4). The standard product is produced in steel and requires no material suffix. If ordering stainless steel products, add the suffix SS, and if you are ordering brass products, add the suffix B. Metric Bite Type Fittings are called out by tube size (in millimeters) i.e. 20mm Tube (S20), while Metric Port Fittings are called out by Thread O.D. and Thread Pitch (in millimeters) i.e. 30x2.0 or 30x1.5. BSPP fittings, while different from U.S. threads are still measured fractionally and are therefore called out by sixteenths of an inch.\u003c\/p\u003e","brand":"OneHydraulics","offers":[{"title":"Default Title","offer_id":31417136119862,"sku":"2706-08-12","price":11.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0252\/8375\/6086\/files\/2706.png?v=1731021734"},{"product_id":"294732","title":"2706-12-12 : OneHydraulics Straight Steel Bulkhead Adapter, 3\/4-14 (-12) Male NPT x 1-1\/16-12 (-12) Male JIC, 5000psi","description":"\u003cp\u003eThe Brennan Industries steel and stainless steel 37-degree flare tube fittings meet all design and performance requirements for 37-degree flare tube fittings in Standard J514 published by the Society of Automotive Engineers (SAE). This design was originally founded as a JIC (Joint Industrial) design, and was later adoped by the SAE to assure dimensional interchangeability between various manufacturers worldwide. Brennan also offers a wide variety of pipe fittings and adapters, including straight thread adapters, male and female pipe fittings, male to female pipe adapters, and straight thread to pipe adapters. Brennan Industries hydraulic tube fitting and adapter part numbers are constructed from symbols that identify the series, size, material and type of product. When ordering part numbers, begin by listing the series followed by the size and the material suffix. Sizes are measured in sixteenths of an inch (example: 4\/16 or 4). The standard product is produced in steel and requires no material suffix. If ordering stainless steel products, add the suffix SS, and if you are ordering brass products, add the suffix B. Metric Bite Type Fittings are called out by tube size (in millimeters) i.e. 20mm Tube (S20), while Metric Port Fittings are called out by Thread O.D. and Thread Pitch (in millimeters) i.e. 30x2.0 or 30x1.5. BSPP fittings, while different from U.S. threads are still measured fractionally and are therefore called out by sixteenths of an inch.\u003c\/p\u003e","brand":"OneHydraulics","offers":[{"title":"Default Title","offer_id":31417136152630,"sku":"2706-12-12","price":7.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0252\/8375\/6086\/files\/2706.png?v=1731021734"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0252\/8375\/6086\/collections\/2706.png?v=1745934023","url":"https:\/\/www.onehydraulics.com\/collections\/shop-2706-straight-bulkhead-male-npt-male-jic.oembed","provider":"OneHydraulics","version":"1.0","type":"link"}