DTP-6-20-SAE8-ZN : Poclain Flow Divider-Combiner, 5.28GPM Inlet Flow, 5075psi Rated, #8 SAE (1/2) Ports

PoclainSKU: B03435H
16-18 Weeks

Price:
Sale price$98.99

Product Details

Data Sheet Download Datasheet
Usually Ships Within 16-18 Weeks
Factory Location Sturtevant, Wisconsin
Port Size #8 SAE (1/2")
Valve Type Inline
Pressure Rating 5075
Inlet Flow Rate 2.11 to 5.28GPM
Country of Manufacture China
Height 1.26
Length 4.23
Width 3.31
Weight 3.75

Description

The Poclain DTP Flow Divider has two functions: dividing and combining of fluid flow. The regulator divides the fluid flow in the direction from A to B and C, and combines flows in the direction from B and C to A. The dividing and combining ratio is 50-50, independent of pressure. The regulator consists of a housing (1), two dividing spools (2) and three weak springs (3). Division of flow: The fluid flow in the direction from A to B and C. The flow in chamber A is divided and flows through the orifices (5) with constant crosssection and throttles (4) into chambers B and C. The pressure drop through the orifices (5) depends on the pressure load. The increase of flow towards one of both chambers provokes increased pressure drop through the orifices. The pressure drop generates the pressure force which shifts both spools (2). Consequently, the throttles (4) are reduced, and the pressure drop of fluid through the throttles increases. The spools keep on moving until the pressure drops through the orifices (5) are balanced. Consequently, both fluid flows are balanced, too. Combining of flows: The oil flow in the direction from B and C to A. The operation is identical as at dividing of flow. The divider combines both flows in the ratio 50% to 50%. The principle of operation depends on the pressure drop, which again depends on the fluid flow. For this reason the divider functions properly only within the defined flow range. Limitation of maximal flow - rate of pressure drop, limitation of minimal pressure - dividing and combining accuracy.