DG 200-06 : Argo Return and Return-Suction Filter Gauge, for EXAPOR MAX 2 and EXAPOR Light Elements

Argo-HytosSKU: 11355500
3-5 Days if in Factory Stock, 6-8 Weeks if not in Factory Stock
8
0

Price:
Sale price$18.99

Product Details

Data Sheet Download Datasheet
Usually Ships Within 3-5 Days if in Factory Stock, 6-8 Weeks if not in Factory Stock
Factory Stock 0
Factory Location Bowling Green, Ohio
O Ring Seals Buna
Voltage None
Country of Manufacture Germany
Height 1.85
Length 1.85
Width 1.85
Weight 0.15

Description

Filter elements installed in hydraulic filters remove dirt from a hydraulic system and therefore become contaminated themselves. Free pores or spaces in the filter material are obstructed by dirt particles, which causes a continuous increase in the pressure loss. The dirt load collected in a filter element gradually increases during service, which also leads to a higher pressure drop. The resulting differential pressure Delta P is monitored by a clogging indicator. Once a preset value is reached, an electrical and or optical signal is generated. The following must be observed in this context - The pressure drop caused by the filter element increases depending on the flow rate, the dirt load, and the viscosity of the pressure fluid. Therefore, a filter element is not regarded contaminated before the clogging indicator responds at operating temperature of the hydraulic system, causing a continuous signal. This gauge is a manometer for optical monitoring of the dirt load in return filters.